Im lost without the PW thread!!!!

[lancehon]

I think I could get my batteries behind the motor. Changing the impeller would be b!tch though

i tried that scenario as well but wont fit with both stock tanks

[skippabcool]

Love seeing them. I havent seen anyone using impeller pumps this year so far.

Chp on ET's

[skippabcool]

Chp on ET's

I was late to the party

[skippabcool]

That is tall. I am sure the operator gets some rocking and not my choice.

[skippabcool]

With the winds we have been getting it might rock way more than I would be comfortable with.

[skippabcool]

Well tried to get the hoses done tonight. I have most done but can't get the dang hose on the pump. And I have 4 to do.

[skippabcool]

I made sure they were lubircated. I heated them and I can get to the first rib and that is it. If I heat it more there is no rigidness to push it on.

[chpthril]

Well tried to get the hoses done tonight. I have most done but can't get the dang hose on the pump. And I have 4 to do.

Heat the hose to the point that the coils could be pinched closed, then slip it over the lubed hose-barb.

[skippabcool]

I need a hose Dr

[skippabcool]

Heat the hose to the point that the coils could be pinched closed, then slip it over the lubed hose-barb.

Thanks I will give that a try. I am guessing you wear gloves of some kind when you do this?

[chpthril]

I made sure they were lubircated. I heated them and I can get to the first rib and that is it. If I heat it more there is no rigidness to push it on.

May need to hold it with a work glove to grip the hot end and push it up.

[skippabcool]

I need a hose Dr

Got one, thanks Mike

[skippabcool]

Man, somebody not knowing the content might wonder what the heck.

[chpthril]

Man, somebody not knowing the content might wonder what the heck.

LOL, yep

[Wakeman22]

Skippa I tried many ways and finally found that putting electrical pliers in the end after heating and pulling them open expanded the hose out real nice. Had to rotate them around a few times to keep the hose round. Then the hose went on real easy. I tried heat a pushing the hose did not work. From hard to totaly soft and had to use gloves. Still no go. I tried needlenose but they were too sharp. I did not even need lube.