Announcement

Collapse
No announcement yet.

Im lost without the PW thread!!!!

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    I was amazed at how much better my system sounded with just the ZXMRLC! It's either that or the replacement of the 8ga power wire that Tige used for the 700.5 with 0 gauge. My gains are in the same spot they have always been (about 10 o'clock) and I can turn the Clarion head unit up to 29/30 now and the ZXM knob maxed with no distortion and the stereo is waaaay louder than it has ever been.

    Comment


      The ZXMRLC is one of the next things that I would like. It is going to have to wait unless I find a killer deal. I figured it would just be better being able to control the tower and cabin separately.

      Comment


        Originally posted by Timmy! View Post
        I was amazed at how much better my system sounded with just the ZXMRLC! It's either that or the replacement of the 8ga power wire that Tige used for the 700.5 with 0 gauge. My gains are in the same spot they have always been (about 10 o'clock) and I can turn the Clarion head unit up to 29/30 now and the ZXM knob maxed with no distortion and the stereo is waaaay louder than it has ever been.
        Both helped. The 700.5 NEEDS to be on 4 ga... NOt usre how you got a boat without the proper power wire but they install it right usually at the factory. With the proper wire, there is no voltage sag, and the amp can really sing. With the smaller wire, you had less power for sure.

        Wire aside, teh ZXM-RLC is a bad-azz preamp/line driver and I too think it helps. I can;t explain it within the laws of physics, but it just seems to give mroe life and headroom to a stock system... There is no logical explanation but hey, it works....
        It's not an optical illusion.
        It just looks like one.....

        Comment


          Set the gains to about 10 o'clock even the sub and tested it outside. I think it sounds better. Later today the water test.

          Thanks for your help again, Phil.

          Now I am going to need to check the wire going to the amps to make sure I am getting enough juice.

          Comment


            Speaking of the ZXM-RLC, Timmy did you ever finish a holder for the controls?

            Comment


              Originally posted by skippabcool View Post
              Speaking of the ZXM-RLC, Timmy did you ever finish a holder for the controls?
              No, I just wound up using my prototype for now. I will revisit this winter - too many other things going on.

              Phil, I don't know how I got 8ga, it was a factory install stereo too. I never really paid attention before I pulled it out but then after I was like .

              Comment


                stuffed with greek salad and clam chowder

                *burp*

                Comment


                  still digesting lunch

                  *gurgle*

                  Comment


                    1 hour to go before no work for the next 2 weeks

                    Comment


                      busy afternoon in here

                      Comment


                        looks like Tige changed their home page design

                        Comment


                          Piss poor signal at the lake

                          Comment


                            Chp gave me a tune up today!

                            Comment


                              Then we had a storm blow through

                              Comment


                                Originally posted by thtrog View Post
                                Chp gave me a tune up today!
                                Nice. I need to see if I can hire him to tune mine while he is here for the Mead reunion.

                                Comment

                                Working...
                                X