Im lost without the PW thread!!!!

[skippabcool]

A young girl with her learners permit backed into it on our July fourth trip in Buffalo Wy

I remember now

[skippabcool]

I'm heading out with Benj to get some gas, later.

Eat some beans

[robert theisen]

April fools falling 12 feet out of his sailboat

there was one on WAKEWORLD titled nicola butler lands 1080.

[Iwndr]

I have 425 hours on old boat i just changed mine. it was worn slightly but probably made it another year or two.

I just looked at my hr meter I only put 41 hrs on the Zee last summer
It was busy I had four new startups in July and August

[chpthril]

What should my amps be set like from the factory?Those pro 80's are huge.

Coming from the factory, they should be set exactly how Tim White told Tige to set them. They are probably pre-set before Wet Sounds ships them to Tige.

For the in-boats on the Syn6, I would set them on High-pass and 100Hz and the sub needs to be low-pass at 80Hz.

For the tower, I would set on hi-pass and between 80-100 Hz.

[robert theisen]

It was some girl cutting out and face planting.

[chpthril]

April fools falling 12 feet out of his sailboat

12ft, thats a heck of a sail boats

[skippabcool]

I have 425 hours on old boat i just changed mine. it was worn slightly but probably made it another year or two.

Mine wasn't worn too bad but I decided to do it. After some of the stuff I have found I am checkign everything. This was one of the things that the dealer had supposedly done several times. Maybe I am seeing this wrong but my The paint was on the bolts and I barely touched them and the paint came off. If that was the case I don't see how it had been changed before.

[Iwndr]

I dont need to change impeller yet, Just get one for a spare I think

[skippabcool]

I just looked at my hr meter I only put 41 hrs on the Zee last summer
It was busy I had four new startups in July and August

Hope you get more this year. How many total hours do you have? I need to check mine once I get the batteries back in.

[robert theisen]

Coming from the factory, they should be set exactly how Tim White told Tige to set them. They are probably pre-set before Wet Sounds ships them to Tige.

For the in-boats on the Syn6, I would set them on High-pass and 100Hz and the sub needs to be low-pass at 80Hz.

For the tower, I would set on hi-pass and between 80-100 Hz.

thanks mike your the man!

[skippabcool]

thanks mike your the man!

x2

[skippabcool]

Dingle must have had the internet cut off from the doghouse

[robert theisen]

Mine wasn't worn too bad but I decided to do it. After some of the stuff I have found I am checkign everything. This was one of the things that the dealer had supposedly done several times. Maybe I am seeing this wrong but my The paint was on the bolts and I barely touched them and the paint came off. If that was the case I don't see how it had been changed before.

same with mine as soon as i turned the bolt the paint came off.now you have piece of mind,unless you put the wrong oil in.J/K

[skippabcool]

Tige and other companies should get Chp to go around and show the dealers what customer service is.

First stop Vegas.