If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Boat ran good after the gas got mixed up a bit and the filters got some fresh gas in them, took about 15 minutes of sputtering and the no power thing at full throttle and she was good to go
"Failing to prepare is preparing to fail" John Wooden- Rest in Peace
after cruising around and up the canyon to get the gas moving around, I pulled in a cove to check the ballast system.
Filled fine with no leaks so I drove around checking out the wake.
Then a T-storm was blowing in and the wife wanted to go, so I go to drain ballast and head in... Well the drain pump on the enzo would'nt come on well that was not a good thing to happen at that moment so I started working on it, checked wiring, checked fuse, checked breakers, All ok. That bites when you find everything is ok and the dam thing still does not work. So I question myself on maybe I wired it backwards, I know, I thought the same thing you are. I would not have screwed that up but I will check anyway. checked the wires they look correct, Cut the wires and switched them. had the wife check it. No Success. Only good part about that sequence of events was once again I proved I did not screw up
I better split this post up
"Failing to prepare is preparing to fail" John Wooden- Rest in Peace
Comment