Im lost without the PW thread!!!!

[lancehon]

Too bad I don't live closer to the Seattle area, I'm sure I could find some ho's to go out

[mls6722]

Worked all day yesterday and the boat is still not finished. I need to drill and instal the drain thru-hulls, connect the new switches and reinstall the locker panels.
All the hoses are made.

I am wondering about the best location to come into the locker with the fill hose. Since the fill connection is forward and inboard, I am thinking of coming in at the forward inboard corner - any thoughts?

[mls6722]

Too bad I don't live closer to the Seattle area, I'm sure I could find some ho's to go out

tempting - even with the drive North, but I am committed to getting the boat finished.

[majestic]

Worked all day yesterday and the boat is still not finished. I need to drill and instal the drain thru-hulls, connect the new switches and reinstall the locker panels.
All the hoses are made.

I am wondering about the best location to come into the locker with the fill hose. Since the fill connection is forward and inboard, I am thinking of coming in at the forward inboard corner - any thoughts?

I went from the pump and followed the fuel fill hose and then down the gunnel to the sac.

[lancehon]

Here's where I ran mine, this is the starboard front corner, I just cut out a corner, it's the highest point when weighted


http://instagr.am/p/JukOeEulqX/

[skippabcool]

I went from the pump and followed the fuel fill hose and then down the gunnel to the sac.

x2

[majestic]

Too bad I don't live closer to the Seattle area, I'm sure I could find some ho's to go out

That would be cool. Its always nice to have more to go out with. I'm still down to come up one weekend and ride with you, and you are always welcome down here as well.

[skippabcool]

Mine also has a piece of plastic something on under the gunnel with wires and such, I ran mine through there as well.

[majestic]

Hopefully you get to enjoy dinner with all you have going.

Thanks that really is the only thing worth enjoying because packing and yard work is not enjoyable to me at all anymore.

[lancehon]

That would be cool. Its always nice to have more to go out with. I'm still down to come up one weekend and ride with you, and you are always welcome down here as well.

Hopefully we can find a weekend that's not crazy busy, how was super cross?

[majestic]

Wear gloves and long sleeves MLS. Those fiberglass slivers are a b$tch.

[Ewok]

I think now is a good time for ecutter to get the new carpet as a courtesy upgrade

I thought he had the new carpet or mat or whatever it is, I can't see how a regular carpet install would have extra stuff by the drivers feet.

[mls6722]

I went from the pump and followed the fuel fill hose and then down the gunnel to the sac.

Here's where I ran mine, this is the starboard front corner, I just cut out a corner, it's the highest point when weighted


http://instagr.am/p/JukOeEulqX/

x2

Thanks - I kept seeing discussion about having a continuously rising run to avoid trapped air. I guess that isn't a problem except near the pump.

[majestic]

Hopefully we can find a weekend that's not crazy busy, how was super cross?

What a great day for it Although it was too bad to see the local guy go down in the first corner he already wrapped up the championship so it was nice seeing someone else win.

[majestic]

Thanks - I kept seeing discussion about having a continuously rising run to avoid trapped air. I guess that isn't a problem except near the pump.

I get an airlock on my port side fill. I need to move the check valve further up the line and see if that fixes it.