Bimini

[J.Dearborn]

New user here and new to Tige', I recently bought a 02 21v Riders edition. It is extremely clean and the only thing needed is a new bimini, its appears a bird got into the cover and went to town. What all are yall running for a top if any, need something low enough that will clear the wetsounds speakers on the tower.
Thanks in advance.

[jimidemo]

At work right now but believe its a sunbrella or enduratop. Have wake designs tower.

[malmz]

I am running an Indy. Flat look, hooks to the tower, and it is tucked right below the tower speakers so that I can still walk under it (bigger Tige). I was looking for a decent picture of mine but can't find a good angle. The drawback is the leave the tubing up all the time if that bothers you, but we leave the bimini up and fabric in place all of the time. The fabric comes off quick enough too, but I leave it up towing back and forth to the ramp for short durations at highway speeds with no issues. If I were towing further I would pull the fabric.

[chopper515]

I have the Indy bimini and I love it.

IMG_2529.jpg

[chopper515]

20160524_181447.jpg

[007]

Hey Chopper, you live in the STL area? I see your StateAMind sticker on the boat!

[chopper515]

007, Yep, I live in the City STL. Bought the boat last year from Stateamind. I day trip to Carlyle on occasion and take 3 or 4 trips to Bull Shoals every year. Heading down there next weekend.

[007]

007, Yep, I live in the City STL. Bought the boat last year from Stateamind. I day trip to Carlyle on occasion and take 3 or 4 trips to Bull Shoals every year. Heading down there next weekend.

Nice. We boat mostly at Lake of the Ozarks (state park), but pull the boat to goto Lake Shelbyville once a year. Been on Table Rock and Norfork, but never Bull Shoals. Thats on my list to enjoy one day.

[J.Dearborn]

Thanks for the feedback

[Samuelp63]

Sorry to bring back an old thread.

I see the indy bimini works on the metcraft tower. Is it the same hardware as mounting to the indy tower?

The reason i ask is i am currently running a metcraft tower on a 00 21v with no bimini. I'd love to put the indy tower on the metcraft while saving for an indy tower.

Thank you,
Sam

[malmz]

Sorry to bring back an old thread.

I see the indy bimini works on the metcraft tower. Is it the same hardware as mounting to the indy tower?

The reason i ask is i am currently running a metcraft tower on a 00 21v with no bimini. I'd love to put the indy tower on the metcraft while saving for an indy tower.

It pretty much fits on any tube tower, you just tell them which size tubes when you order it, and then configure the supports however you need to in order to hold the main hoop flat (I make my front down about an inch so it doesn't grab air on the way to the launch ramp). it wasn't made for my 06 Tige tower, but after a while of trying different positions I found a way I liked and was sturdy.

[chopper515]

Samuelp63, Like Malmz said, it pretty much fits any tower. I ordered it directly from Indy and told them the diameter of my tower and they sent the proper spacers.