Announcement

Collapse
No announcement yet.

Weighting a 20V

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Weighting a 20V

    Anybody weighting their 20V? We have been using our boat for the past 2 Summer's and we are looking for larger wakes. What is working?

    #2
    the weighting diagrams for the i's on some other hits should help.
    some weight in side compartments by motor, and the add weight to the walkthru....want to make sure your putting some up front to keep the nose and middle section in the water. the rear w/taps wont need a ton of weight...taps will help in that area.

    Comment


      #3
      I recently picked up two Let's Go Ride sacks for the rear lockers. So that's 500# in each locker, plus another 350# up front. That makes for a nice big clean wake at 22mph with TAPS at 6 - 8 (depends on how many people are in the boat).

      Comment


        #4
        In our 20V we have a 250lb sack in each of the storage areas behind the bow seats and 600lb sacks in each of the rear storage areas. Here is our wake at 22mph with TAPS set to 0 (for wakeskating):

        Comment


          #5
          Uh,whoa...that is a big wake.

          Comment


            #6
            20v

            Does the 20v pre convex v have a bigger better wake then 20v convexv?
            2016 Tige Z3, 2014 Tige Z3
            2013 Tige Z3, 2004 Tige 24V (Legen....dary)

            Comment


              #7
              Dizamn, that's a nice wake.

              Comment

              Working...
              X