Display engine hours

[gohuskies90]

HI, I can't seem to be able to display the engine hours, can somebody tell me how to get them to display? I have an '04 24V

Thanks!

[chadster2]

I have a 22 v 2004. Every time I take out the batteries it resets to zero. If you have the tool you can read the real # off a connection that is located on the motor. To read it off the dash (which is almost always reads just from the last battery reset) you press both buttons at the same time and then scroll down? On the right gauge?

[gohuskies90]

Thanks Chad, figured out the right combination!

[rtmcdonald]

If you have the tool you can read the real # off a connection that is located on the motor.

Do you know what tool this is and and where I'd connect it?

[Stingreye]

My connector was longer than most other cables and the dust cover cap thing had a tether attached to it.

My 2004 engine with a PCM motor uses MEFI4B.

I used this connector attached to laptop with included software
http://www.mefiburn.com/sc/details.asp?item=mefiscan1

I thought for sure my clock wouldn't match the engine hours but it did. Also shows what RPM the motor was running at for how long.