Cat out of the bag prop!

[Wickedcummins]

Well ACME is now giving out the information so my prop is as follows. 2249 its a 15 inch monster 14.25 with a .105 cup. they also have a bigger 2313 would be great with a smaller 343 engine and 4k+ weight. They also got some 5 blade stuff going out now!

I tell you what this prop gets the job done with 3600 lbs in the boat like its empty! =)

[Iwndr]

Those b some big pictures

And we all thought you were just selfish... How long have you had that?

[Fiveflat]

What prop are you replacing? Have any comparison photos?

[Wickedcummins]

Replacing the 537.. not next to each other I dont.. didnt even think about it! Ive had mine for about a month. Thats another one I got for a friends rz2

[Wickedcummins]

My top speed is still 45mph and the hole shots unreal with it! fully weighted down it feels like it did empty with the 537.

[Guma]

Any clearance issues on the trailer?

[Timmy!]

Why didn't you go with the 2247 that has the .150 cup?

[Duncan]

Well ACME is now giving out the information so my prop is as follows. 2249 its a 15 inch monster 14.25 with a .105 cup. they also have a bigger 2313 would be great with a smaller 343 engine and 4k+ weight. They also got some 5 blade stuff going out now!

I tell you what this prop gets the job done with 3600 lbs in the boat like its empty! =)

So a prop like the 1235 (14.5 diam, 14.25 pitch, 0.105 cup) but with an extra 0.5" diameter (which, admittedly, is a lot). Really different from the stock 537 (13.5 diam, 16.o pitch, 0.105 cup).

I do not think I would have clearance on the trailer to run that 2249 prop.

[Bruizza]

So would you suggest I get one of these instead of the 1235 with the 343 engine?

[Guma]

So would you suggest I get one of these instead of the 1235 with the 343 engine?

I ran the 1235 on my 22Ve with the 343. I had every compartment filled with sacs for surfing and the 1235 performed flawlessly.

[Bruizza]

We ran the 1235 on our axis with the big engine and 3500+ pounds and wedge and it rarely had an issue. It never had an issue if we didn't use the wedge. I only plan on running the pro ballast set up but i know occasionally we are going to want to put an extra 1500-2000lbs in it.

[Wickedcummins]

So would you suggest I get one of these instead of the 1235 with the 343 engine?

No I would run the 2313 if it will clear

[Wickedcummins]

Why didn't you go with the 2247 that has the .150 cup?

Didnt like the .150 cup with the 1273 I had didnt seem as smooth as the 1235 when using them. Almost like its just too much cup and bite

[Wickedcummins]

[Tault145]

Its sooo prettty... If you ask really nice, they might even send you a free t-shirt like they did for me haha