How to replace this pin?

[TigeMike]

I’m already missing one and this one looks pretty rusty. I’d rather replace before losing the platform. I’ve checked big box and mom & pop hardware stores and Tractor Supply. Bakes has a version that might work but before going that route wanted to see if there was a direct replacement option. This is on a 2007 20V

[sandm]

I found mine for the old supra at home depot. they were in a 2pk and iirc they were in the pull out bins that you dig thru in the hardware/nuts/bolts aisle. I have seen them in lowes as well when perusing for hardware for projects.
search double wire safety pin.

[lee]

You might want a stainless steel one.

[mikemcclain8]

https://www.lowes.com/pd/Hillman-2-5...E&gclsrc=aw.ds

take an old one with you to match size.

[chpthril]

https://www.mcmaster.com/pins/wire-lock-clevis-pins/

[SONIC]

https://www.mcmaster.com/pins/wire-lock-clevis-pins/

That was going to be my suggestion as well. Mcmaster is a beast.

Also +1 on stainless(Mcmaster has them) . Saltwater use?

[TigeMike]

Appreciate the responses, wish the boat wasn’t in winter storage so I could get the pin measured and replaced now. I believe it spent most of its life prior to me docked at a marina in PA during the summers so hopefully never got saltwater exposure.

[Surf406]

Go to your local hardware store or fastenall and get a set of stainless ones and you’ll be golden

[Waketripper]

I ordered 2 of these for my 201 RZ2 & they fit fine...
https://www.mcmaster.com/98480A525/

[Waketripper]

I ordered 2 of these for my 2010 RZ2 & they fit fine...
https://www.mcmaster.com/98480A525/