Announcement

Collapse
No announcement yet.

06 22V

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    06 22V

    going to do service this season myself what do you all recommend for oil in the trans and v drive unit?
    Building memories one river trip at a time

    #2
    Originally posted by foxfam312 View Post
    going to do service this season myself what do you all recommend for oil in the trans and v drive unit?
    V-drive, if it's a Walter, should get 30W non-detergent motor oil and the trans should be the Borg Warner Velvet drive and will be Dexron III or higher.
    Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More

    Comment


      #3
      Thanx chpthril, I will make sure it is a walker, the way everything is going nowday's with money trying to save every which way I can.
      Building memories one river trip at a time

      Comment


        #4
        Hey chpthril - I am changing out the oil in my Walter V-drive and noticed it seems to have some leakage from around the lower plate. Looks like I will need to replace the gasket on the lower plate. Do you know who supplies them around the Lake Wylie area or online? Thanks for the info..

        Comment


          #5
          Originally posted by pm22v View Post
          Hey chpthril - I am changing out the oil in my Walter V-drive and noticed it seems to have some leakage from around the lower plate. Looks like I will need to replace the gasket on the lower plate. Do you know who supplies them around the Lake Wylie area or online? Thanks for the info..
          Hmmm, I would try Walter directly, that sounds like an odd part for anyone to have on hand. How bad, is it s leak or a seep?
          Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More

          Comment


            #6
            Originally posted by chpthril View Post
            Hmmm, I would try Walter directly, that sounds like an odd part for anyone to have on hand. How bad, is it s leak or a seep?
            The leak isn't bad, drips just enough to create a greasy mess if any water gets up that high in the bilge. Not enough to create a problem for the V-drive though. After a little research, I came up with the same answer, I will go directly through Walter. Thx...PM

            Comment

            Working...
            X