Thank god you had your crew with you.
-
-
The prop had a small gouge. But I have a wierd sound when I spin the prop by hand. It's very tight in the struct bushing? I'm taking her in for a check up Tues.
Does prop have a deep growl sound when spin it by hand?
I'm a lttle worried?
SSurge, I'm going out again in 4 weeks
I will be off the water earlier next time
Comment
-
Hey Guys
Anyone want to go out with me next time, just need to bring a shovel
Regarding my river trip saga, after my TWO HOUR TOUR, we finally get to the dock (Riveria), I've notice the posted sign before CAREFUL WATCH FOR DROPOFF. There's a 4' drop off at the end of the ramp. Now theres not enough water to use the boat ramp (10:00 pm). I back the trailer in from the side of the ramp thru the dirt. I have to put my truck in 4x4 low. Getting the boat on the trailer was another mess....We had to wet the trailer carpet runners by hand, because only half of the trailer was in the water. You can imagine the rest......... Shen made it on the trailer by 10:30 pm. I got a bite to eat and was in bed by 2:15 am.
Any takers!!!!!!!!!!!!!Comment
-
I'm gonna pass on this go round but thanks.....
I'm going to Havasu this weekend, leaving in a couple of hours actually....the site # 6 launch can be fun but not as much fun as what you had. Hope you have better luck next time around.Comment
-
rmarion
Is your prop in alignment with the rudder? You might have bent the strut and/or the shaft.Comment
-
GOOD NEWS!!!!!!!!!!!
I spoke with Daniel at Corona Tige Watersports. He said, the sound I'm hearing is the shaft turning inside of the dry rubber bushing and it's normal. WHEW!!!!!!!!!!!!!!!
Thanks Daniel!!!!!!!!!!!!!
Ok, back out to the River LOL.
We have a Houseboat at Mead rented June 29th!.
Joe have fun a Havasu!
Peace Guys!Comment
Comment