Rear deck lid hardware pics

[Jim_B]

I just bought a 1998 pre2200I wt and the hardware for the rear seat lid is all missing. I'm looking for pictures of the hardware on others boats so I can figure out what I need and how it's set up. Thanks for any help.

[spharis]

I'll get some pics if I get a chance. It is a hinge with 6 screws, but I am sure you can find a similar one somewhere. It doesn't seem that custom.

[Jim_B]

spharis it looks like their is also met to be gas shocks and a catch plate of some sorts for the lid.

[spharis]

I have no shocks, just some straps. Might check with JeffT on the shocks. He has a 22' model from 97.

Here's what I have on my cpu, I'd have to get closeups at home.

[Jim_B]

Your config is alot different then mine.

[spharis]

Yeah....check with jleger.....correction on the JeffT......jleger has a year older model.

[imscarlet]

jleger has the 2150, I've never seen photos of the 2002 and would be interested in seeing some more of the storage compartment as I have a 2000 and was looking at adding a storage compartment to it for ballast. Do you mind posting the dimensions of the storage compartment and the distance between the front of the rear seat and the engine cover please.

[TeamAllen]

Your rear deck should look like this.

[spharis]

jleger has the 2150, I've never seen photos of the 2002 and would be interested in seeing some more of the storage compartment as I have a 2000 and was looking at adding a storage compartment to it for ballast. Do you mind posting the dimensions of the storage compartment and the distance between the front of the rear seat and the engine cover please.

I'll get some pics. It is large enough for a few of the ski locker bags, but the liner would not hold the weight. I store ropes and pumps in there.

[Jim_B]

Team Alle I need pictures of the hardware that is under that rear lid(hinges, shocks,locking mechanism,catches) Thanks

[Jim_B]

Help,please. I need to see some pictures of the hardware that attaches the rear deck lid on a 98 pre 2200I wt

[TeamAllen]

I will be at our boat next week and will get them then if you still need them.

[Jim_B]

I do, Thanks a million.

[TeamAllen]

Got them. I hope it is what your need. The actual pics were taken @ like 5 Megapixels. I had to reduce them by 75% to upload them. If you need the higher quality pics and don't have any size restriction on your email I can send them to you.

[Jim_B]

Mike, Do you have a close up of the bracket that the cable release mechanism goes into to hold the lid closed?