2003 Tige 21i Dash Trim Piece

[mdavidson]

Hey Everyone,

Does anyone know where to get replacement trim pieces like the ones shown in the picture below? Broke mine last year so want to get a new one.


Thanks,
Marshal

[Ashroh2263]

We have a similar problem with our 2007, trim pieces are basically the same. The boat is new to us as of spring and now spending the winter fixing loose ends and cleaning.
We had a trim piece that was cracked and had a 1" hole via a screw hole, basically it was being held together via the vinyl wrap. Couldn't find a replacement part for it so repaired it.
The trim is made of abs plastic. I plastic welded the parts that were cracked to hold together. For the hole I melted an abs plumbing fitting in acetone and then applied the slurry over the hole once a day until I built it up higher then the original mold, sanded it smooth and magic fixed. Came out surprisingly good, never did a repair like that before, googled to find some info and gave it a try.
Now just need to find a color match on the 4 way stretch vinyl as ours is beige,
So anyways, that was my experience, might be worth a shot.

[isaac]

Did you need to remove the plastic panel? If so, how bad was it to deal with the wiring and gauges? I have the same problem on my 2003 22v. Considering making a mold and pulling fiberglass replacement parts, but the wiring and future intermittent problems and such warded me off. And I’m an electrical engineer! BTW, the trim pieces look to be the same as mine. I called Tige awhile back and they have no parts or leads to offer....

[Ashroh2263]

In this circumstance, it was the leg (cup holder portion) no issues removing . To remove the main dash would be alot of pictures and tape marking wires to guages. Can't stress how easy the abs mold was to fix, worth a try