Announcement

Collapse
No announcement yet.

need help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    need help

    I have a 2001 21i and missing a bracket for the latch to the rear storage locker. Can someone with this same boat please take a picture of the bracket that is bolted to the back side of the seat that the latch on the door secures too? I want to fab one up and just need to get an idea of what the original part looks like.

    Thanks

    #2
    Originally posted by 2whlin View Post
    I have a 2001 21i and missing a bracket for the latch to the rear storage locker. Can someone with this same boat please take a picture of the bracket that is bolted to the back side of the seat that the latch on the door secures too? I want to fab one up and just need to get an idea of what the original part looks like.

    Thanks
    I will try and get a picture this wkend of both brackets on each side of the storage locker.

    I thought I remember a picture of this being taken some time ago also.

    check out this, is this what you are looking for?
    http://www.tigeowners.com/forum/show...storage+locker
    Last edited by TRD; 11-13-2009, 01:40 PM.
    Dale
    2000 21i Tige

    Comment


      #3
      no, those pics only show the gas spring hardware that I have already replaced. I am looking for the part in the middle of the door that the latch secures too. There is a bracket missing. The part on the door is still there, just missing the bracket that attaches to the boat.

      thanks

      Comment


        #4
        ok, is it in the middle just so I know what I am taking picture of..
        Dale
        2000 21i Tige

        Comment


          #5
          yes, the latch is in the middle of the door. The part I am looking for bolts to the carpet just behind the backrest of the rear seat.

          Thanks!!

          Comment


            #6
            hope this is what you are looking for.
            Attached Files
            Dale
            2000 21i Tige

            Comment


              #7
              yes!! Your bracket only as two bolts. I have 4 or 5, I forget now but not two. Looks like the bracket has slotted holes? I think I can have that piece made and then drill holes to fit.

              Thanks!!

              Comment


                #8
                This is what my bracket bolts too.

                Comment


                  #9

                  Comment

                  Working...
                  X