The boat is a 20v switch series. I plan to run the boat in salt water exclusively. See photos for my marelon T-150 strainer and the bronze apollo T valve installed. Fittings coming off the T are Groco 1 1/4 fittings. (Npt to hose barb, male to male 1.1/4, 1.1/4 to 3/4 (for garden hose hookup), and then 3/4npt to garden hose fitting (off amazon). The marelon (forespar) strainer runs a 1.1/4 hose barb to 1.1/2 fitting for marelon products.
The wood backing plate is ~22 inches wide and it is a 2x6 pressure treated. If i remember correctly, the thru fibreglass bolts are 3 inches and the washers and nuts are all stainless steel. The brackets around the apollo valve are 2inch galvanized plumping brackets with stainless screws.
The wood backing plate is ~22 inches wide and it is a 2x6 pressure treated. If i remember correctly, the thru fibreglass bolts are 3 inches and the washers and nuts are all stainless steel. The brackets around the apollo valve are 2inch galvanized plumping brackets with stainless screws.
Comment