Prop Puller

[KonaKing]

Anyone close to me in Ut county have a prop puller I can borrow ?

[MoneyPity]

Anyone close to me in Ut county have a prop puller I can borrow ?

Wish I could help but Chicago is one big jump away. If you are not in a rush, I saw some on ebay

[raythompson]

You might be able to borrow one from a prop repair shop if you have your prop repaired at the same location. That is what I have done several times.

[KonaKing]

You might be able to borrow one from a prop repair shop if you have your prop repaired at the same location. That is what I have done several times.

Thanks went in to work today and built one like this today. Built a four blade one in a about hour.

Worked great

[22ba]

Thanks went in to work today and built one like this today. Built a four blade one in a about hour.

Worked great

Like how?

[jleger98]

Redneck Prop puller:

Tie one end of a rope to a tree, the other end to the prop. Pull truck ahead until prop comes off.

[samw]

Redneck Prop puller:

Tie one end of a rope to a tree, the other end to the prop. Pull truck ahead until prop comes off.

LOL

[jwanck11]

HAHAHA!

[KonaKing]

Like how?

the 2 u shapes fit around the shaft and the plate goes on the other end. 4 bolts go through the blades and then tighten as needed. works like a charm and cost about $10 to build.

[KonaKing]

Redneck Prop puller:

Tie one end of a rope to a tree, the other end to the prop. Pull truck ahead until prop comes off.

Some how I see that getting you a Darwining award

[talltigeguy]

I will be up in SLC Friday afternoon until Saturday late. I will have a prop puller with me. Check your PM.