Need some input

[dogbert]

Ok, so I was floating around with the wife last Sunday just chillin' because it was too hot to do anything else. My graphics on the side of my boat have taken a beating over the years and probably need to be replaced.

One thing I did notice is that the white line going forward from the Tige logo (on the side) is actually in the gelcoat and not part of the graphic. So, should I replace it with what's there now or go with something completely different? If different, any of you creative types have any ideas?

Here's an older pic of my boat:

[Jason B]

Personally, I like the simple look of that. If it were me I would replace it exactly as is. In fact, I did just that on my boat last week.
just my

ps. pm sent regarding the sticker

[Guest]

I also like the clean look of the decal. I also would do the same.

[SPBFAN]

Just take of the TIGE' and leave the rest that would look good that way.

[da.bell]

Um, I don't see a picture dogbert.

[Waterski-Rebel]

I also think it looks good the way it is.

[jwanck11]

X5

[TeamAllen]

I'm not creative at all so I would keep it the same. Maybe someone else will have a good idea.

I like the drink holder/grabrail on the transom.

[samw]

I'm not creative at all so I would keep it the same. Maybe someone else will have a good idea.

I like the drink holder/grabrail on the transom.

X2

[samw]

Dog
I have the same graphics that you do and I notice the same white line and always wonder if I would replace them how I would do it. I also think I would replace with whe I have or alter from where the line stops with something new. We may need the input of Rag or the guys that do the custome lettering them may have a creative idea..