2009 Tige Boats Product Line

[KonaKing]

Increase or decrease sales will be down, when peeps cant even afford housing boats are not going to be sailing

[Guest]

And the hull thicker than 1/4 inch!

You are enamored about that 1/4 inch when the boat already is one of the heaviest boats in its class. How thick do you think it should be? should it be 3/4 an inch for the whole hull?

If it was the boats bottom keel it does not need to be real thick because it is supported by a larger surface area and the pressure to the water.

My 1994 Four Winns was around 1/8" and other than me using too long off a screw when adding a bilge pump that was never an issue.

[eks]

You are enamored about that 1/4 inch when the boat already is one of the heaviest boats in its class. How thick do you think it should be? should it be 3/4 an inch for the whole hull?

If it was the boats bottom keel it does not need to be real thick because it is supported by a larger surface area and the pressure to the water.

My 1994 Four Winns was around 1/8" and other than me using too long off a screw when adding a bilge pump that was never an issue.

Well some of the 05 and 06 hull were 3/4 thick, as some pointed out when they installed their ballast system. It worked than why not now?

[dogbert]

And the hull thicker than 1/4 inch!

How 'bout we trade boats. Mine's 1/2" on the sides, almost 1" on the hull and over 1" on the transom. I can tow an aircraft carrier with my ski pylon.

I do have wood stringers, but they appear to be stiffer than the other guys (kinda gives me a woody, too) It weights 400lbs more than your boat empty,so it puts off a nice wake.

[xpjim1]

eks

we also measured the whole piece . In your picture you are about an 1/8 inch low with the tape measure from the top. That looks like at least a 1/2 inch thick to me and puts into line with the others .

[Jason B]

The cost of the boats has to go up at least the cost of annual inflation at a minimum or the manufacturers profits erode. Normally 3-6% is safe to assume for inflation. This year looks to be especially ugly in terms of inflation so my unprofessional opinion would be to look for a larger than normal leap in price (assuming Tige leaders possess basic business skills, and I'm inclined to think they do )

Sounds like a good argument to keep my boat!!

[chpthril]

Well some of the 05 and 06 hull were 3/4 thick, as some pointed out when they installed their ballast system. It worked than why not now?

Drilled my 06 2 weeks ago and it was about what yours looked like.

[da.bell]

We all have a lifetime hull warranty. It there is a problem, tige should step up and replace.

[BrownClown]

New 20V paint

I know that there will be a new gel-coat color scheme. I've seen pictures! I was sworn not to reveal it on here because it hadn't been released to the public yet. It's a lot more "radical" than the current options.

[da.bell]

Kawasaki Green???? he he he he

[CP3]

I think/hoping this will be a really good year for tige....

[da.bell]

I think/hoping this will be a really good year for tige....

doubt it but from what someone on WW said about the new tower, Bu should be worried.

[Lucky 275]

doubt it but from what someone on WW said about the new tower, Bu should be worried.

So they're going to a short reversed tower? I hope not...

[da.bell]

I don't know but it will be interesting.

[Tanner]

I know what the tower looks like.... but I'm not saying 4 fear of the reprocussions.

Lets just say I'm glad I didn't say anything.

I'm trying to get u boys a psuedo sneak peak of one on a boat, if someone will do the photoshop for me. I won't post it up until the day b4 the pro-am though. You guys can wait 2 weeks can't u?