gages

[illiniboarder88]

Does anyone have any suggestions as to where to look for a new gage or two? My tach doesn't work, and I'm not sure yet on my speedo.

[lee]

What year boat do you have?

[illiniboarder88]

2000

[lee]

Are they white face with a chrome bezel?

[illiniboarder88]

They are white faced. I'm not sure on the chrome bezel. The speedo is an "airguide"

[wannabewakeboarder]

I doubt this will help, but dose your dash look anything like this? Its also a 2000

[illiniboarder88]

Dash is different, but the gages look like they may be the same. The speedos certainly are.

[Thomas Chobot]

Guages

I also have those AirGuide speedo on my 98 22I Tige had some in stock but they wanted twice what I could buy another brand. My seal went bad ( I have the ones that the water goes threw) Any one know where to find some?

[spharis]

Look on http://www.wakeboatworld.com at my Tige'. I replaced all my gauges. The Airguides are junk after a few years sun exposure. Most of the gauges are plug and play with a little wiring.

I also posted some part numbers in this forum if you search.

[illiniboarder88]

Spharis, is there any good way to test a gauge to see if it is the gauge or the wiring?

[spharis]

What gauge?

[illiniboarder88]

tach. Mine isn't registering at all. I'd think if I took it loose and attached it to a live wire, the needle would at least jump if it worked. Does this make sense?

[TRD]

I doubt this will help, but dose your dash look anything like this? Its also a 2000

This is exactly what my boat looks like. Just for future references where would I find gauges for this boat?

[spharis]

Those Airguides are not worth replacing if you can find them. I bet if you bump yours hard enough they will crack into about 3 pieces at the plastic joints. I bought most of my replacements through ebay and boatersland.com

That 4-in-1 gauge looks like a Faria. You can find them on the web.

[spharis]

tach. Mine isn't registering at all. I'd think if I took it loose and attached it to a live wire, the needle would at least jump if it worked. Does this make sense?

You can hook the wires it to a multimeter and see if you are getting signal.