Brand new RZ2

[Timmy!]

Wow! Awesome sound system!!!! One thing - make sure that there are "caps" on the drain plugs on the bottom of the cup holders near the glovebox or those amps against the port side wall there will be toast if people use them at all!

I kept finding water down in that storage area and it took me awhile to figure out where it was coming from and then realized it was from drinks sweating in the cupholder or liquid being spilled while driving.

[CP3]

That is one sick system. How much were the amps?

[tigeblue]

That is one sick system. How much were the amps?

I will have to check on that one. But I think the 4000se was around 3 or 4 g's
the 2300se were around 2500

Not to confident on those numbers but I will check for you.

[CP3]

where did you get those?

[tigeblue]

Wow! Awesome sound system!!!! One thing - make sure that there are "caps" on the drain plugs on the bottom of the cup holders near the glovebox or those amps against the port side wall there will be toast if people use them at all!

I kept finding water down in that storage area and it took me awhile to figure out where it was coming from and then realized it was from drinks sweating in the cupholder or liquid being spilled while driving.

You are so right. I'm on it!

[tigeblue]

where did you get those?

The guys at Lightning ordered them from Arc Audio

[CP3]

Wow! Awesome sound system!!!! One thing - make sure that there are "caps" on the drain plugs on the bottom of the cup holders near the glovebox or those amps against the port side wall there will be toast if people use them at all!

I kept finding water down in that storage area and it took me awhile to figure out where it was coming from and then realized it was from drinks sweating in the cupholder or liquid being spilled while driving.

are they not putting drain hoses on the new tiges? all of mine around the glove box have hoses

[Lunchbox]

Very Sexy system TigeBlue... You'll have to come to the Cold water reunion this year... I'd like to hear that bad boy...

[Timmy!]

are they not putting drain hoses on the new tiges? all of mine around the glove box have hoses

Apparently not.

[turbonine]

I would assume the platform fix should be pretty easy...Can't they just make it 3 inches narrower and put it 1 inch higher? I bet that would fix the problem except for the most heavy ballasted boats.

For this reason, and a few others, I am waiting for a new boat. If they do not fix it, I will continue to wait...or become TallbrandXguy. But the sound of it makes me throw up.

Come on over to the dark side!

It isn't all that bad. I have a feeling you would be able to pick up some nice low hour late model boats in the near future with our economy taking a dump. It just won't be an all white 23LSV.

[Timmy!]

For this reason, and a few others, I am waiting for a new boat. If they do not fix it, I will continue to wait...or become TallbrandXguy. But the sound of it makes me throw up.

I think you can get a Teak platform if its that big of a deal to you. It's really not that bad, it still creates a nice surf wave if weighted properly (still better than my buddy's Moomba with more ballast).

[da.bell]

I think you can get a Teak platform if its that big of a deal to you. It's really not that bad, it still creates a nice surf wave if weighted properly (still better than my buddy's Moomba with more ballast).

Is the problem with the platform because it is too long?

[Lucky 275]

My dealer had a teak platform made for an RZ2. So sweet... Apparently the guys that that make the platforms for Mastercraft are just east of Nashville.

[turbonine]

Is the problem with the platform because it is too long?

Too wide. The platform on a RZ comes all the way out to meet the sides of the hull. Plus it isn't rounded at the end, so the end cuts into the water.

RZplat.JPG

Should look like this

Malibu Tige.JPG

[Timmy!]

LOL! If it looked like that you would then be grouped in with those people...