Wet Sounds XS650 in boat Group Buy-B Stock

[dogbert]

The rotozip will do that easily. If you don't have one, it is easily the only thing I have ever seen on an infomercial that was worth the purchase. I was just hoping for a fiberglass free install. $80 for the hole saw to use it just a few times seems to negate the point of having gotten a good deal on the speakers.

Can you mail it to me?

I used a rotozip. It works ok, but there's going to be a lot of dust, so be sure to wear a mask and some eye protection...it's definitely not even when you're done, but since it's covered up, it's ok. I gotta say, the speakers are noticeably better sounding than anything I'd heard before. What an upgrade.

[CP3]

are all the speakers gone?

[TigeDuner]

Your install looks great. I did 4 of 6 and it took about 10 minutes a hole to open it up. The screws went right into the RF speaker holes but I had to use #8 x 1" stainless screws. Hope to finish the other two this week.
I would use a 5.5" hole saw and open it up from there. 5.75" could get you to close to the screw holes.
The chart shows you only have to make the hole size 5.6".
Goos luck.

[Guest]

It does look great. Did you have the factory system first?

[dogbert]

Yes, from 1999. The were JVC speakers...actually in pretty good shape, except for the grills.

[dogbert]

are all the speakers gone?

They're all in my boat.

I plan on having more speakers than the Wet Sounds boat.

[wetsounds1]

Looks Great!

We still have about 15 pairs left. So come and get em!!!! I also think we have a few tower spks as well in B Stock so ask the guys about those.

Thanks for helping us out! I am glad to gain a bit more room in the warehouse for some new top secret items that are on the way.

Tim
Wet Sounds

[dcsnowwake]

mmmm top secret!

ill be a test dummie!

[spharis]

Component sets with a x-over????

[evil0ne]

Looks Great!

We still have about 15 pairs left. So come and get em!!!! I also think we have a few tower spks as well in B Stock so ask the guys about those.

Thanks for helping us out! I am glad to gain a bit more room in the warehouse for some new top secret items that are on the way.

Tim
Wet Sounds

Tim, I'm going to be helping you out real soon with your warehouse problems. I'd love to do the in boat speakers too but I had the Clarion separates which would leave six bright white tweeters hanging out. Any ideas?

[evil0ne]

spharis reading my mind/problem.

Also, anyone have an idea if two 485s will fit above this bimini?

[dogbert]

Looks Great!

We still have about 15 pairs left. So come and get em!!!! I also think we have a few tower spks as well in B Stock so ask the guys about those.

Thanks for helping us out! I am glad to gain a bit more room in the warehouse for some new top secret items that are on the way.

Tim
Wet Sounds

Hey, where'd you get the jet sound that you had at the Austin Boat Show? Any chance you could get it to us?

Talltigeguy got us a police siren...I figured we all want to have not only great sounding systems, but also the sound effects to have some fun with them.

[wetsounds1]

You can try the LED puck idea and use those to replace the tweeters. I think that would be a cool way to go.

E mail gyver@wetsounds.com and give him some ideas of your measurements so we can see if you can fit the 485's.

The jet sound was downloaded from itunes. The artist was "The Hollywood Edge Sound Effects Library".

The album was "The Edge. Vol 1" and "The Edge. Vol 2"

Jet was on edge Vol 2 called "F8 Jet By: Very Close with Distortion" and the funny car was Vol 1 "Car Revs 4X”

There are a ton more too, have fun!

Tim
Wet Sounds

[spharis]

Your install looks great. I did 4 of 6 and it took about 10 minutes a hole to open it up. The screws went right into the RF speaker holes but I had to use #8 x 1" stainless screws. Hope to finish the other two this week.

What model speakers were you using?

[dogbert]

The jet sound was downloaded from itunes. The artist was "The Hollywood Edge Sound Effects Library".

The album was "The Edge. Vol 1" and "The Edge. Vol 2"

Jet was on edge Vol 2 called "F8 Jet By: Very Close with Distortion" and the funny car was Vol 1 "Car Revs 4X”

There are a ton more too, have fun!

Tim
Wet Sounds

Cool, thanks!