Wet Sounds XS650 in boat Group Buy-B Stock

[wetsounds1]

Thanks Guys, No Problem.

E mail justin@wetsounds.com or gyver@wetsounds.com and let them know what stickers you want and color and sizes and your address and we will get some sent out to anyone who wants some.

We still have some xs 650 b stocks left so call us up.

The WS420 Eq is brand new. So no chances on B Stocks. It will be shipping the end of this week. So anyone looking for one!

Ladies man, e mail me what amps you have now and I will see what we can make work. twhite@wetsounds.com

No need for an install guide. Very simple to install the EQ. One main input. 3 outputs. Tower, Boat and Sub.

So take one RCA from head unit to main input. Then 3 RCA's from the outputs. Tower goes to tower amp, Boat goes to amp running in boats and Sub goes to sub amp.

The pics I took didn't turn out very good. I have pics coming that the guys from Hydrotunes took. So hopefulle they are better or I will have to re shoot.

I have 1 XS-XXX under the drivers footwell in a 1.4 cut foot slot loaded ported box. I have 2 XS-XXX under the passenger storage. They are in 1 cut ft sealed and reverse mounted. To show of the magnets, more for show.

I posted this on another thread but here is an interview I did with a website out of the netherlands. http://us.wannahaves.com/item/BABEFF...Wakeboard_Boat

It has some good shots of the boat. Looks better than the pics I took!!

Tim
Wet Sounds

[CP3]

nice video tim

[LadiesMan217]

Hey Tim, Would def like some stickers! I also have some ?'s on the best power supply for your speakers. I just bought a 22i From Blaine and Cathy at GBMC (awesome people) and they are building my system. I want the best clarity and volume... I have always been into high end car audio but the marine stuff is new to me. Everyone is raving about your product so I think I got lucky right from the start! The boat will have six 650's, I think thats what they are, and a pair of pro-60's. I want optimum sound quality and volume with both. I figured you would have that answer. How many watts per channel rms/ohm? and Blaine is a kicker dealer, so if you could recommend what amps they make that would work best. I heard of the factory configuration with that five channel kicker amp but that doesn't seem right to me. I also have some amps, that I took out of my jeep, that I could use as well. THANKS in advance.

.........?

[rushin]

WOW, that was fast...

I ordered my 650's on thursday and got them today. Thanks wetsounds.

[wetsounds1]

.........?

Ladies man, e mail me what amps you have now and I will see what we can make work. twhite@wetsounds.com


Tim
Wet Sounds

[Ks]

Thanks Guys, No Problem.

The WS420 Eq is brand new. So no chances on B Stocks. It will be shipping the end of this week. So anyone looking for one!

Tim
Wet Sounds

Thanks Tim,

that site was good,, but I am still going to press you (all in good fun) for more pic, good or not

Also- For the EQ. You should offer a pre release at a special price for all Tige owners

On another note, I am planning to hook my 6 X650's to a PDX 4X100 amp. Then have a PDX 150.4 for my Threesome and a PDX 1000.1 for my two XS12 subs. Everything is pretty straight forward but I am confused how should hook my XS650's up to my PDX 100.4 ? how would you hook up 6 speakers to a 4 channel amp while keeping a 4 ohm rating and 100 RMS per speaker?

Thanks in advance.

P.S. When you need custom Reg #'s for the boat look me up..

[wetsounds1]

Thanks Tim,

that site was good,, but I am still going to press you (all in good fun) for more pic, good or not

Also- For the EQ. You should offer a pre release at a special price for all Tige owners

On another note, I am planning to hook my 6 X650's to a PDX 4X100 amp. Then have a PDX 150.4 for my Threesome and a PDX 1000.1 for my two XS12 subs. Everything is pretty straight forward but I am confused how should hook my XS650's up to my PDX 100.4 ? how would you hook up 6 speakers to a 4 channel amp while keeping a 4 ohm rating and 100 RMS per speaker?

Thanks in advance.

P.S. When you need custom Reg #'s for the boat look me up..

Will do for sure! I need some numbers! Pics are coming!

Easiest way, You would hook up the 6 650's on the 4 ch running 2 of them on the front 2 ch's and the other 2 chs with the 2 pairs in parallel. making them 2 ohm stereo. Most amps will double the output at the lower impedance and wind up getting each speaker the same power. But normally at the cost of more heat and draw and a bit more distortion but not too big of a deal. As long as your amps can breath. These amps run cooler and draw less but do not look like the will double the output as they are rated the same at 4 ohms as 2 ohms.

So you will not be getting 100 to each speaker. The 2 in 4 ohms will get 100 watts each and the other 4 will get 50 watts each.

I would hook it up and see how it sounds for you. Those amps have good power for their size so you will probably be fine. Probably the easiest and most straight forward.

Tim
Wet Sounds

[Big Wave]

Thanks Tim and Justin
Just got my 2 pairs of 650s I ordered last week. An e-mail and a call was all it took. could not have been easier. You guys will get all of my future audio needs.

[wetsounds1]

Thx No Prob. We have some more B Stock left so anyone in need, call us up.

Also, The new EQ, The WS-420 will be shipping next week!!!

Here is another video from CES that shows the EQ so you can get a better idea of how it works.

http://www.12volt.com/index.php?opti...temid=88889047

Tim
Wet Sounds

[rushin]

Those EQ's are great. I hope you are making alot of them because something tells me you are going to selling alot. What is the price on those?

[rushin]

What is the price on those?

Forget that, brain fart, I found it.

[TigeDuner]

Thx No Prob. We have some more B Stock left so anyone in need, call us up.

Also, The new EQ, The WS-420 will be shipping next week!!!

Here is another video from CES that shows the EQ so you can get a better idea of how it works.

http://www.12volt.com/index.php?opti...temid=88889047

Tim
Wet Sounds

Great video Tim. I have 2 amps, sub, threesom, and 6 cabin speakers. All to a sony HU with 3 sets of preamp outs. How does it connect to the HU? I assume you no longer control volume at the HU. Does the 420 have a mute button?
Thanks, TD

[wetsounds1]

You can still use the volume on the head unit as with any EQ. You just don't need all the outputs from the headunit. You only run one RCA from the head unit to the EQ. The the 3 RCA's from the eq to the amps. (tower, sub and in boat.

What I do is set the levels on the EQ to where I want it and still use my head unit and transom remote to turn volume up and down and mute. But when I only want towers only, I can turn the boats off. Or vice versa.

The EQ also allows you to dial the volume of the towers up with the boats about half way at any given volume on the head unit. So you can balance the towers and boats etc...

Tim
Wet Sounds

[TigeDuner]

So, the RCA's from the amps to the HU now go to the EQ and an RCA is added from the HU to the EQ. Sounds simple enough.
Maybe Tige Performance Boats will have one at the AZ boat show in Phoenix this weekend. Thanks.

[rushin]

Here is what I did with my 650's. I can't afford those big dollar unit's.