raise driver seat

[deltaboy1960]

somewhere i saw a kit for driver hieght extension anybody help with this

[wannabewakeboarder]

You mean a bolster seat, Where there is a smaller part that flips up so you are siting up higher?

[billspin]

I bought a taller pedestal and replaced the shorter one. Is this what you are talking about?

[LovinPowell]

I bought a taller pedestal and replaced the shorter one. Is this what you are talking about?

My bolster seat is wearing out, I talked to my dealer about doing this exact thing. Where did you buy a taller pedestal from?

[billspin]

This is what I got.
Made by Garelick Marine Products, the base is 13”inches tall, has 6 securing holes and will fit all seats that take a 2-7/8” tube diameter. The pedestal part number is 75913-30.
I cut 3" off and shortened it. I now sit in the seat with the bolster in the normal seated position and look out slightly above the windshield. I think these are like what I purchased. The 10" model would be equal to what I ended up with after I cut it off. Be sure it is the same as your current one. Mine was a direct replacement.
http://cgi.ebay.com/ebaymotors/GAREL...spagenameZWD1V
This site has many different heights. http://cgi.ebay.com/ebaymotors/12-1-...WDVWQQtcZphoto

[kana12]

ive thought about putting mine on a air shock to raise and lower it.. i havent realy sat down and figured out how im gonna do it but it can be done im sure...

[LovinPowell]

This is what I got.
Made by Garelick Marine Products, the base is 13”inches tall, has 6 securing holes and will fit all seats that take a 2-7/8” tube diameter. The pedestal part number is 75913-30.
I cut 3" off and shortened it. I now sit in the seat with the bolster in the normal seated position and look out slightly above the windshield. I think these are like what I purchased. The 10" model would be equal to what I ended up with after I cut it off. Be sure it is the same as your current one. Mine was a direct replacement.
http://cgi.ebay.com/ebaymotors/GAREL...spagenameZWD1V
This site has many different heights. http://cgi.ebay.com/ebaymotors/12-1-...WDVWQQtcZphoto

Thanks for that info, I will definately check that out.

[chpthril]

ive thought about putting mine on a air shock to raise and lower it.. i havent realy sat down and figured out how im gonna do it but it can be done im sure...

Tige offers an adjustable-height seat base. May find it in the aftermarket also.