Do any of you see whats wrong with this?

[Ruune]

I was looking at the Z1 pics and noticed that its clearly illustrated that a wakeboard wont fit in the rear compartment...

[Jason B]

I don't see a wakeboard!? Well appointed "storage compartment" though.

[da.bell]

Can you get a bigger picture. She is just "ugly"!!!!!!!!!!! he he he NOT!!!!!!!

I am sure there are a few problems with the boat. I know that putting boards into those lockers are difficult even with my 24Ve. This boat is 3 feet shorter and I would think that the attempt was tried but they didn't succeed in putting the board into that locker.

[Ruune]

edited... used the pic from wakeworld.

[Ruune]

maybe I'm being nitpicky... but I get that way when I'm looking at new boats.

however, I'd like to see the wake on this thing- loaded down with factory ballast. dont care what it looks like w/o. I've got high hopes for this boat's wake... as it has roughly the same dimensions as as the new nautique 210 SAN. with wetsounds, convex v hull, 340 ponies, and some sick ballast, this thing is going to be a contender... because as cool as a boat looks, rides, etc. It all boils down to what the wake is like.

[Jason B]

I fit 3 boards in my rear compartment on a 20V. One flat on the botttom, 2 on the side behind the seat backs. PIA getting them out!!!! But, they do fit.

[Timmy!]

It fits, you just have to compress the boot down to make it work. My lockers are similar, for some reason Tige felt the need to put an angle on the divider there. At some point I am going to take my jigsaw in my boat and get rid of that crap because it's a pain in the azz when trying to put a board in there.

[da.bell]

I can get boards into that compartment by doing the same thing as Timmy does. But, the port side of the boat is a PITA when putting boards into it because of the same wall that the picture shows when inserting it.

[talltigeguy]

It fits, you just have to compress the boot down to make it work. My lockers are similar, for some reason Tige felt the need to put an angle on the divider there. At some point I am going to take my jigsaw in my boat and get rid of that crap because it's a pain in the azz when trying to put a board in there.

I thought it interesting that Tige put that wall in there to limit the way you get a board in there. All it does is cover the fill hose to the gas tank. My 24V fill hose sticks out there with no covering. I always choose function over form, and when I see Tige do things that make a boat less functional, but more pretty, I think Malibu.

[evil0ne]

I don't see a wall there, I see the seatback and cushion. I bet it goes in underneath the rear seat. It would be bad to show someone trying to get a board in a spot it doesn't fit.

[chpthril]

It fits, you just have to compress the boot down to make it work. My lockers are similar, for some reason Tige felt the need to put an angle on the divider there. At some point I am going to take my jigsaw in my boat and get rid of that crap because it's a pain in the azz when trying to put a board in there.

They come out real easy, only held in with a couple of screws.

[Domsz06]

you mean there is a wakeboard there?

[ragboy]

If you look on the far left, there seems to be even more storage. Nice pencil holder.

[chpthril]

It fits, you just have to compress the boot down to make it work. My lockers are similar, for some reason Tige felt the need to put an angle on the divider there. At some point I am going to take my jigsaw in my boat and get rid of that crap because it's a pain in the azz when trying to put a board in there.

How 'bout the transom cupholder

[spenchey2]

i saw that also. I'm hoping that boat has ballast on it thats why she can't fit it in there cause i can fit multiple boards in my 22v lockers but that has NO ballast.