Announcement

Collapse
No announcement yet.

List of my winterized projects

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    List of my winterized projects

    What do you all plan on when u winterize your boat. While mine is parked im going to hopefully try and add a tower. depends if i have money.

    ~Get the back Latches recovered because they sat out in the sun too much
    ~get any rips in the seats repaired
    ~Add another set of tower speakers
    ~New RPM gauge (mine has never worked except the hour meter)
    ~add 2nd battery (learned that comes in handy).
    ~Permanet BALLAST SYSTEM (I have it all planned out except the front, Theres no hatch to put one in) but i have 2 650lb bags I stick in the back. and the bow seems to stay down just fine and the wake stays clean so im not worried about it. Filling them manually is a pain in the
    ~Alot of cleaning
    ~Figure out where the heck im putting my sub. (any tips on what to use to cut the hole to put it under dash? 12" round sub.



    What do you plan on doing?
    Also Tips on where to get a new tower from... I dont want a monster tower cause they sit to low due to how wide my boat is!+


    Forgot to mention why it wont start... Got a loose wire somewhere. Starter doesnt even try and nothing dims so I know its not getting signal to do anything.
    For Those About To Ride We Solute You

    #2
    I would like to add:
    Tower speaker
    Maybe a new stereo-That clarion has to go.
    A heater system
    Clean air exhaust
    Fix a broken seat
    a lot of extra cleaning
    Second battery
    I would love perfectpass-but I don't see it to much $$$$
    Some sort of ballast system even if it is just a few bags
    Light bar-anyone using some nice led light on their light bar?
    Make some sort of rope holders along the engine compartment

    Sam
    15 Escalade ESV-Black
    08 RZ2-Blue

    Comment


      #3
      Perfectpass i have ahook up on perfect pass so it wont be too bad... id rather pay 600 than 1200 .... Light bar I may just make myself. Buy the clamps go buy a polished bar and go buy some cheap halogen lights at walmart lol. I have a problem paying for a lightbar at the prices they are!

      My boat looks like its plummed for a heater just doesnt have the actual heater. Now that u mention it, I may add that If i have some extra money. I wouldnt mind that fresh air thing either. my boat is loud as hell but i dont hear it when im wakeboarding... you would be surprised how loud those 2 little rockford fosgate speakers are.... I just have a bad *** amp on it.
      For Those About To Ride We Solute You

      Comment


        #4
        http://www.tigeowners.com/forum/show...?t=2798&page=2
        Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More

        Comment


          #5
          [QUOTE=ddmracing05;100009]
          ~Figure out where the heck im putting my sub. (any tips on what to use to cut the hole to put it under dash? 12" round sub.



          QUOTE]

          Plain old jigsaw works the best. Just make sure of the clearance on the backside.

          If you are looking to put it in the drivers bulkhead, feel around the carpet, may be already there......or at least connect the slots.
          Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More

          Comment


            #6
            theres absolutely nothing... ive torn the carpet out trying to find something. just a bunch of fiberglass.
            For Those About To Ride We Solute You

            Comment


              #7
              Originally posted by ddmracing05 View Post
              theres absolutely nothing... ive torn the carpet out trying to find something. just a bunch of fiberglass.
              Well, decide on the placement, lay the template up there, trace it out with a Sharpie, drill a hole and cut it out with the saw.
              Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More

              Comment


                #8
                Originally posted by ddmracing05 View Post
                Forgot to mention why it wont start... Got a loose wire somewhere. Starter doesnt even try and nothing dims so I know its not getting signal to do anything.
                There is a 50 amp fuze on the engine, check that.
                Common Sense is not so Common
                Looking for fat chicks for long walks, romance, cheap buffets, and BALLAST.

                Comment


                  #9
                  I left winter when I moved here.
                  Cursed by a fortune cookie: "Your principles mean more to you than any money or success."

                  Comment


                    #10
                    Originally posted by zad0030 View Post
                    There is a 50 amp fuze on the engine, check that.
                    checked every fuse, and trips there are... Wires seem OK. I think its in the switch but idk yet. Performance watersports may loan me one.
                    For Those About To Ride We Solute You

                    Comment


                      #11
                      Originally posted by ddmracing05 View Post
                      checked every fuse, and trips there are... Wires seem OK. I think its in the switch but idk yet. Performance watersports may loan me one.
                      It is in neutral?? right???
                      Common Sense is not so Common
                      Looking for fat chicks for long walks, romance, cheap buffets, and BALLAST.

                      Comment


                        #12
                        u know... I just checked that before u sayed it... It was, just had to jiggle it alittle .... But then It turns into a bigger problem... Engine isnt turning
                        For Those About To Ride We Solute You

                        Comment


                          #13
                          Sounds like you might have a bad starter solenoid.

                          Comment


                            #14
                            nope... Shot motor for sure.. Not sure if heads and what not are cracked yet though
                            For Those About To Ride We Solute You

                            Comment

                            Working...
                            X