Announcement

Collapse
No announcement yet.

Plans for tomorrow

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Installing a PSS shaft seal and hoping I don't have to order a specialty socket to get the nut off the double taper shaft.....grrrrrr.......
    http://www.wakeboatworld.com
    []) [] []V[] [])

    Comment


      #17
      We'll be up at the lake around 7:30.

      We were there today and the water was good until 2 pm.
      Formertigeowners.com
      I used to be a member in the past.

      Comment


        #18
        Originally posted by spharis View Post
        Installing a PSS shaft seal and hoping I don't have to order a specialty socket to get the nut off the double taper shaft.....grrrrrr.......
        SP, I think you are going to have the most fun... Well, probably the most 4 letter words being said between anyone of us. Good luck and remember, two beers = 1 hour of work.

        Comment


          #19
          Im heading out early morning to a river and then to my aunts for a party.
          Common Sense is not so Common
          Looking for fat chicks for long walks, romance, cheap buffets, and BALLAST.

          Comment


            #20
            Wow, sounds like fun. I have my children tomorrow. They just went back to their mothers house.

            Comment


              #21
              Originally posted by Original Wing Nut View Post
              I am headed on four wheelers up to one of the peaks (Willard Peak) above the wasatch valley and BBQ then watch the fireworks from above. The peak is about 10,000 feet and we will be able to see several different displays. We will also be able to overlook the shallow Willard Bay that I took out my prop on last week, hopefully not see anyone else as stupid as I, but chances are from my vantage point I will see several. I am staying off the lake this week. We are headed to Jackson Hole Thursday and will run the Snake River Friday. We are trying for activities that crowds can't screw up.
              call me on props I have a great source on them ACME and the prices are right.

              Comment


                #22
                Originally posted by spharis View Post
                Installing a PSS shaft seal and hoping I don't have to order a specialty socket to get the nut off the double taper shaft.....grrrrrr.......

                If you are working on a GM you are going to need this and if you are working on anything else you will need somthing simular to this. Let me know if you get stuck. I work for OTC tools and can give you some direction on the tool you will need to pull the pully.
                Attached Files

                Comment


                  #23
                  Just got back from a 12 hour lake trip. We put out at noon and got off the lake at midnight. In the cove with couple hundred other boats to watch the fireworks and it was awesome! We had 5 boats tied together. Getting back to the ramp in the dark with 200 other boats wasn't the best when your 5 miles away. Lucky I know the lake.
                  We were so close to the fireworks we were getting the fallout. Best 4th trip yet. Plus it was my wife's birthday. I didn't take my memory card for my camera but I took a few with my sis in law's. I'll post some once I get them.

                  I couldn't believe all my nav and anchor lights worked. I've never used them until tonight. Loading was kinda scary but my wife's 2nd time and at night. She's good.

                  Comment


                    #24
                    Well I got a late start and didn't get to the lake until 830, but amazingly I only had to wait for 2 boats to launch at Callville. Got off the lake at 430 and there were about 5 vehicles in line ahead of me. I don't know if it was the mid week holiday or the fact that it was about 116 but the lake wasn't that bad.
                    Honey I'm home!

                    Comment


                      #25
                      I would guess the later being 116 degrees.....

                      Comment


                        #26
                        I saw an RZ at my lake. Dark blue. The first one I have seen around these parts. I was going to go up and offer a soft drink, but they took off before I could say hello.

                        I might add the Dark blue made it look extremely plain. Not nearly as nice as the other pics I have seen of one on the water. My wife's sister said 'that boat is brand new?'
                        Be excellent to one another.

                        Comment

                        Working...
                        X