how big are dash guages

[yllw20]

I have an 03 20i. It has a dummy guage on the dash and I was going to put a wired stereo remote there. I already have the transom remote and know I need a Y cable and extension to run it.

The remote that works w/my system is 2.415" wide needing a 2" hole. Does anyone know how wide the guages are and how big the hole is behind them?

[Domsz06]

that seams about right. Are you wanting someone to check for you? or just asking in general? I'll check tonight if you want. I have that same dumy gauge, just let me know.

[spharis]

Pretty sure Tige' only uses 2" and 4" to date, a dealer would know better.

[Domsz06]

i agree based on what I remember seeing and what not. if it's too big you can always make a spacer fit, and if it's too small dremels work great

[yllw20]

dom,
If you have the boat right there at the house would you mind checking size.
Mine is in storage away from the house. I should have had one put there in the first place, but was only thinking about the transom. Now I know what a pain it is to have to open the glovebox to lower the stereo or run to the back of the boat.

[Domsz06]

yeah it's in my back yard. I'll check and post up tomorrow. Cool?

[Domsz06]

2 inches

[yllw20]

Thanks dom.

I may have to go see what kinda space I have between the guages. Might try to squeeze it in. Looks like I am going to the storage this weekend. It is just so hard to go and not hook up and hit the lake.

[Domsz06]

the hole is 2 inches, so you should be fine. Bring a dremel tool and widen it just a bit if you need to.I had to do that on my cup holders, now that they are in you can't tell I did anything