So Marine Max is our Florida Tige dealer now and I have my 2017 Z1, with 122 hours, in for service as well as bilge filling with water which they state is not covered under Tige warranty or Extended Tige warranty.
Is this truly the case.
And what about the charges do those seem correct for bilge pump?
Job #2 - External
COMPLAINT: CUST STATES ENGINE MAY HAVE AN OIL LEAK, OIL IN BILGE WATER
CAUSE: Check for oil/ fluid leak within bilge
CORRECTION: placed mats to absorb oil/fliuds within bilge while engine ran for more than 30 mins.
Outcome, no leaks were found, bilge was washed out to remove oil residue
Labor
Code Description Mechanic Total
DIAG OIL FOUND IN BILGE WATER SC 67.50
DIAG BILGE PUMP FAULT SC 67.50
TC R&R BILGE PUMP 67.50
Part # Description Qty Price Total
Parts
MM3075065 LOPRO 900 AUTO BILGE PUMP 1.00 86.99
Subtotal for Job #2: 289.49
Job #7 - External
COMPLAINT: CUST STATES HE IS SEEING MORE WATER IN THE BILGE THAN NORMAL.
CAUSE: water leakage; check for water leaks
CORRECTION: tightened wash out cap; while running the boat for more than 30 mins; All ballists were
filled and drained; no leaking water was found. However, the bilge pump had a fault 44 (open circuit) and a
stored fault of SPN: 707 / FMI:3 / OC:13
Will need to Diag the bilge pump for operation.
Labor
Code Description Mechanic Total
DIAG INSPEC FOR WATER LEAKS WHILE RUNNING ENG IN TANK SC 27.00
DIAG TEST RUN ENGINE AND CHECK FOR WATER LEAKS SC 67.50
Subtotal for Job #7: 94.50
Total is 383.99 just for bilge not operating correctly with Tige 5 year warranty??
Thanks in advance !!
Is this truly the case.
And what about the charges do those seem correct for bilge pump?
Job #2 - External
COMPLAINT: CUST STATES ENGINE MAY HAVE AN OIL LEAK, OIL IN BILGE WATER
CAUSE: Check for oil/ fluid leak within bilge
CORRECTION: placed mats to absorb oil/fliuds within bilge while engine ran for more than 30 mins.
Outcome, no leaks were found, bilge was washed out to remove oil residue
Labor
Code Description Mechanic Total
DIAG OIL FOUND IN BILGE WATER SC 67.50
DIAG BILGE PUMP FAULT SC 67.50
TC R&R BILGE PUMP 67.50
Part # Description Qty Price Total
Parts
MM3075065 LOPRO 900 AUTO BILGE PUMP 1.00 86.99
Subtotal for Job #2: 289.49
Job #7 - External
COMPLAINT: CUST STATES HE IS SEEING MORE WATER IN THE BILGE THAN NORMAL.
CAUSE: water leakage; check for water leaks
CORRECTION: tightened wash out cap; while running the boat for more than 30 mins; All ballists were
filled and drained; no leaking water was found. However, the bilge pump had a fault 44 (open circuit) and a
stored fault of SPN: 707 / FMI:3 / OC:13
Will need to Diag the bilge pump for operation.
Labor
Code Description Mechanic Total
DIAG INSPEC FOR WATER LEAKS WHILE RUNNING ENG IN TANK SC 27.00
DIAG TEST RUN ENGINE AND CHECK FOR WATER LEAKS SC 67.50
Subtotal for Job #7: 94.50
Total is 383.99 just for bilge not operating correctly with Tige 5 year warranty??
Thanks in advance !!
Comment