1999 21V Rear Locker Panels

[21V]

Recently bought a 1999 21V that is missing the panels in the rear locker. I've been looking around the web for either a used-parts site, but had no luck. I figured I ask before I start building a custom set.

I'm looking for the following:

• port and starboard panels on the rear lockers
• Upright U-Channel on the starboard stern side
• panel on the stern starboard side where the shower should be and the u-channel for the engine panel mounts to

Thanks

[Jetdriver]

I’d be willing to bet you’re on your own.
You can get U channel all over online or at Home Depot, Lowe’s, etc.. (I’d go with aluminum if you’re putting ballast bags in there). Lots of people are reinforcing their panels vertically as well to avoid bowing panels.
1/2” hdpe can be sourced on eBay fairly affordably and easily cut to size.

[KoolAid]

21v hatchp.png
The hatch pockets?

21v bulkhead.png
Rear Bulkhead?

[21V]

I’d be willing to bet you’re on your own.
You can get U channel all over online or at Home Depot, Lowe’s, etc.. (I’d go with aluminum if you’re putting ballast bags in there). Lots of people are reinforcing their panels vertically as well to avoid bowing panels.
1/2” hdpe can be sourced on eBay fairly affordably and easily cut to size.

Thanks for the HDPE tip

[ATTACH]51704[/ATTACH]
The hatch pockets?

[ATTACH]51705[/ATTACH]
Rear Bulkhead?

Missing the bulkhead on the starboard side.

[KoolAid]

Thanks for the HDPE tip



Missing the bulkhead on the starboard side.

Do you have cad or know someone with a cnc router?

[21V]

Do you have cad or know someone with a cnc router?

I have access to cad, no access to CNC though. If you can share the file or general dimensions I could figure something out.

[KoolAid]

im me your email address.