Announcement

Collapse
No announcement yet.

Walkthrough WindScreen

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #61
    I thought it was alot like wakeboarding---crash, crash, crash. I was much improved this year though. With the max of 4-5 months of wakeboarding we have to take advantage of what's available.

    Comment


      #62
      i think it's similar yes.
      Originally posted by G-MONEY
      It hurts me to say it but go OU but only for this weekend!!!!

      Comment


        #63
        I can relate to the "crash, crash, crash" on the snow. A little harder than the lake.

        Comment


          #64
          I have a 2005 22v and would be interested in a windscreen if you can still get them made, my email is dougpaper@hotmail.com. If you already did the grunt work and it fits i would love to get one.

          Thanks


          doug

          Comment


            #65
            Originally posted by dougpaper View Post
            I have a 2005 22v and would be interested in a windscreen if you can still get them made, my email is dougpaper@hotmail.com. If you already did the grunt work and it fits i would love to get one.

            Thanks


            doug
            Sure, i'll email you the worksheet. Take the measurements and email back to me. Usually take my guy 3-5 to get it done.
            Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More

            Comment


              #66
              I have a 2007 20v and am getting ready to install a 3 outlet heater from heater craft. I would love to have a windscreen. Can you get one shipped to CA and does it include the guides?

              Comment


                #67
                we never take our wind screen out!!! it get pretty windy on canyon ferry and its nice to have a little break from the wind when your in the boat
                Here's to swimming with bow-legged women

                Comment


                  #68
                  Originally posted by philanum View Post
                  I have a 2007 20v and am getting ready to install a 3 outlet heater from heater craft. I would love to have a windscreen. Can you get one shipped to CA and does it include the guides?
                  Sure, PM me your email and I'll email back the worksheet for taking the measurements. Guides included.
                  Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More

                  Comment


                    #69
                    Regarding a pullout tube underneath the passenger side. Is there anyone who knows if it is possible to drill a hole in the floor in the compartment in front of the driver's seat (20V) next to the fresh air hose and pass a heater tube through this hole and underneath the walkway through another hole on the passenger side where the fresh air intake tube goes through the floor? I can route a tube around the bow to the passengers side but thats 15 feet of tubing...worried about heat loss over that length.

                    Comment


                      #70
                      Weird. In my 35+ years of boating I have never run into a boat with a heating system. Maybe my dealer has one that they can demo the heater setup and how well it helps the skier who just finished a run warm up.

                      We used to be hardcore and put on wetsuits and left top open until it has our turn and then we would take of sweat suit top zipper of the wetsuit and hit 55 degree water.

                      Up hear in the Windy city are it just is not warm enough until May.

                      Heck it is supposed to snow tomorrow qnd over the weekend. Friggin stinks

                      Comment


                        #71
                        Originally posted by philanum View Post
                        Regarding a pullout tube underneath the passenger side. Is there anyone who knows if it is possible to drill a hole in the floor in the compartment in front of the driver's seat (20V) next to the fresh air hose and pass a heater tube through this hole and underneath the walkway through another hole on the passenger side where the fresh air intake tube goes through the floor? I can route a tube around the bow to the passengers side but thats 15 feet of tubing...worried about heat loss over that length.
                        As long as there is bilge cavity under where you want to drill, i'd say yes. Pull the bilge vent tube out, reach in the hole and feel around. If it's open space and not stringers, then go for it.
                        Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More

                        Comment


                          #72
                          I have a heater outlet in walk way on driver side that pulls out and can pass to passanger. If boarder just out of water often sit in walkway with the wind break in place and dry themselves with the heater hose feels great
                          Graham
                          Graham

                          Comment


                            #73
                            I don't understand all this talk about heaters. When we get out of the water, we're looking for shade to cool off in the 120 degree heat. Our water temps get into the 90's.

                            Comment


                              #74
                              Hey I saw this post and I want to get a windscreen, I have a guy in town that can make it but where can I find the guides at?

                              Comment


                                #75
                                You can email me at cmcamp76@live.com regarding the windscreen guides. Thanks

                                Comment

                                Working...
                                X