Post the Best Picture of Your Boat

[freeheel4life]

I heard Mike and Rob got you scheduled to up your tower speaker game. Cant wait for it to come in.

[Sublimer23]

Yes! I decided 2 rev10 says you know how to have a good time....but 4 says I came here to party

[wired1236]

[ATTACH]50299[/ATTACH] Patiently waiting for it's additional pair of Rev 10s to get installed by freeheel4life!

Are those inserts running up your tower? I know some have talked about them on here but haven’t seen them on a boat.


Sent from my iPhone using Tapatalk

[freeheel4life]

He made them and had them powder coated.

[Bamer]

I just replied to sublimer23’s original post about the tower inserts he made. You should see it in the recent post list.


Sent from my iPhone using Tapatalk

[freeheel4life]

Hes not super active around here. Hopefully he responds to the post. If not I will mention it when he drops off and see if hes into making more. Im sure he saved the templates.

[NG572]

Boat Pic correct position.jpg

[Sublimer23]

I'm still waiting for more interest before I made a batch of them. My machine shop friend needed to make about 20 to make it worth our time. I should probably post about them again and see if I can round up more people since there is probably a lot more m2 towers around now. These ones on my boat are actually steel and powder coated however the ones we were planning to make would be out of aluminum. Cost would be around $300 a pair for them power coated grey or black. You could also skip the powder coating and take them to a body shop and have them painted any color you'd like.

[Bamer]

I'm still waiting for more interest before I made a batch of them. My machine shop friend needed to make about 20 to make it worth our time. I should probably post about them again and see if I can round up more people since there is probably a lot more m2 towers around now. These ones on my boat are actually steel and powder coated however the ones we were planning to make would be out of aluminum. Cost would be around $300 a pair for them power coated grey or black. You could also skip the powder coating and take them to a body shop and have them painted any color you'd like.

Ok. Did you make inserts for the inward side of the tower or just the outward facing sides? If not, would the outward facing side insert fit on the inward side?


Sent from my iPhone using Tapatalk

[Sublimer23]

I just made them for the outside. I believe the same pattern would fit on the inside as well. Honestly it doesn't look weird or unfinished without them on the inside and they have a nice finish on both sides. However if you wanted to light them up you would need them on both sides. I got a call into my machine shop guy to see if we can do a smaller quantity and how that would affect the price. I need to make one set and take them over to the dealer and compare the fit on other boats as well since the pattern was made off of my tower alone. Not sure how much different towers will vary. Not a lot I'd assume.

[unruhlyRZX3]

2017 RZX3

IMG_3028.jpgIMG_3196.jpgIMG_3294.jpg

Classy behind the Diesel

[dilligaf622]

Sent from my iPhone using Tapatalk Pro

[wired1236]

I'm still waiting for more interest before I made a batch of them. My machine shop friend needed to make about 20 to make it worth our time. I should probably post about them again and see if I can round up more people since there is probably a lot more m2 towers around now. These ones on my boat are actually steel and powder coated however the ones we were planning to make would be out of aluminum. Cost would be around $300 a pair for them power coated grey or black. You could also skip the powder coating and take them to a body shop and have them painted any color you'd like.

I’d take a set! Just let me know when you have it figured out.


Sent from my iPad using Tapatalk

[Sublimer23]

Ok, Will do!

[Frosty_Power]

Old one...
P1110313.jpg
DSC06271.jpg


Newer one...
P1140878.jpg
IMG-20170619-WA0003.jpg