My 2014 RZR appears to have one more ballast port than on other years. I have 3 in the bow and 4 in stern. In the bow, I assume vent, overflow and drain. Stern would be vent, overflow, drain and bilge. Is this correct, and what is the difference between vent and overflow? Thanks for any feedback.
Announcement
Collapse
No announcement yet.
Extra ballast ports on 2014
Collapse
X
-
Are you referring to actual hose connections on the sacs or the chrome thru-hulls in the side of the boat?Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More
Comment
-
2014s had 2 vent/ overflows at each point(2 front 2 rear). Was a change that went along with going to the 1 inch line. So for each side in the front there is 3 thru hulls. 2 vent and the drain pump. In the back there is going to be 3 on one side and 4 on the other(maybe 4 and 4). 2 vent, drain and the 4th being the bilge pump exit.
Each bag has 2 independent vent/ overflow lines. its not just T'd in. This was over kill and I believe later discontinued. Made for a mess of hoses underneath.
Comment
-
Yep those are it. 2 vents(will both flow when the big is full) and the third being the exit for the drain pump. A forth in the rear id for the bilge.
The tanks are basically the same as a water tank or waste tank(boat or RV type). Not sure the construction process.
Comment
Comment