Wetsounds RGB LED Controller Location 2107 RZX3

[duanehortman]

Anyone know where the the Wetsounds controller for the 2017 RGX3 is located? Need to pair remote.


Sent from my iPhone using Tapatalk

[chpthril]

Last one I wired up interior lights to, was located behind the glove box. Open the port bow seat back and it was right there.

[gumby]

I can't believe you can see that far into the future! Mike you are truly amazing.

[duanehortman]

Last one I wired up interior lights to, was located behind the glove box. Open the port bow seat back and it was right there.

Thank you. Can’t get my remote to pair . Any ideas?


Sent from my iPhone using Tapatalk

[freeheel4life]

Thank you. Can’t get my remote to pair . Any ideas?


Sent from my iPhone using Tapatalk

Unplug the controller power and ground. Press and hold the music up and down on the remote(bottom right gray button, holding down the whole buttton, not just up or down). While holding the buttons plug in the power and ground plug. If it pairs the lights blink white 3 times.

[duanehortman]

Unplug the controller power and ground. Press and hold the music up and down on the remote(bottom right gray button, holding down the whole buttton, not just up or down). While holding the buttons plug in the power and ground plug. If it pairs the lights blink white 3 times.

Yeah did that a lot. Never would pair


Sent from my iPhone using Tapatalk

[chpthril]

Does the controller light up, indication its trying to work?

[duanehortman]

Does the controller light up, indication its trying to work?

The remote does. Does the actual controller light up also?


Sent from my iPhone using Tapatalk

[freeheel4life]

Negative. Is this the original remote that came with the boat??

[chpthril]

Yes, I meant remote controller.

[duanehortman]

Negative. Is this the original remote that came with the boat??

Not sure, I see you can only pair one remote per controller . Can you clear remotes from controller?


Sent from my iPhone using Tapatalk

[freeheel4life]

Not that I know of. Thats why I asked if it was original remote. WS may be able to tell you if theres a process to clear the controller. Also, just making sure, is the RGB/Speaker lights enabled at touch screen while trying the pairing procedure??

[duanehortman]

Not that I know of. Thats why I asked if it was original remote. WS may be able to tell you if theres a process to clear the controller. Also, just making sure, is the RGB/Speaker lights enabled at touch screen while trying the pairing procedure??

Yes rgb option is turned on at the touchscreen


Sent from my iPhone using Tapatalk

[chpthril]

MY understanding is that once the brain powers up and sees the sync signal from a remote, it should sync with that remote. Any previous remotes make no mater.

I would get a volt meter and check for voltage across the power harness at the brain.