Alpha Z Rack Fingers

[sneedes]

2009 Tige RZ4 with Alpha Z tower.
Looking to obtain some replacement rack tines/fingers for the factory racks. Somehow, someone managed to shear the bolts off. Of course, no one in the family knows how that happened. Barn trolls I guess. Regardless, hoping someone has a lead on obtaining just the fingers. Wouldn't be upset if it was an upgrade going to a surf/wake or double surf combo tine/finger.

I tried the Krypt/Bulletlines bat rack, but the screws from the backing plate to the fingers weren't 2" on center, so they wouldn't line up.
https://www.bulletlines.com/double-wakesurf-tower-rack-p/1555.htm

IMG_3523.jpg
IMG_3550.jpg

Any advise outside the $700+ Samson racks?

[chpthril]

Did it trash the threads? Remove that one broken bolt, source some new bolts and mount them back up.

[sneedes]

Threads might be trashed. One is broken off inside.
But the bigger problem is the barn trolls stole 1 of the 2 fingers.

[Ironrequiem]

I have these from a 2015 R20 that the fingers may work for you.
They can be removed from this plate.

t1.jpg
t2.jpg
t3.jpg

[KoolAid]

Reuse the krypt backer plate. Drill a hole in the center and the two holes for the pins.

[sneedes]

@Ironrequiem: can you find/show the hex bolt size/thread as well as the distance between the bolts to the backing plate? 2" on center? Everything else (Monster, Krypt, etc.) seemed to be 1 3/4" on center.

[Ironrequiem]

Pics / measurements ...

Looks like 2 1/4" on center for fingers..

r1.jpg
r3.jpg
r4.jpg
r5.jpg

[chpthril]

I guess missing one fork changes things.

[sneedes]

Thanks all. I guess I need to look more at the backing plate in addition to the fingers.