Upgrade '18 r20 ballast

[Rbuss4]

I have not had tome to calculate the dimensions yet, so going off my gut. I think the stock sac is billed out at 400# sac and its square'ish on shape. Ours is an Enzo style L. I will try to get the capacity calculated tonight.

Sounds good Mike. Once you have that; will you be able to calculate approx. fill and empty times for ballast timer adjustment? Also, can you confirm that they will be plug and play on the 2015 RZR? No re-plumbing needed? If so, I would be happy to be your first order! -Rick

[chpthril]

Looking at 825# p/sac

@Rbuss4,

Our goal is to mate with the factory plumbing. SO plug-n-play, but expect a couple minor mods to the hoses.

The current lower hose runs under the sac with a 90* into the sac, we have changed this so the new fitting is on the lower corner of the back panel and will get a straight fitting. I think this hose will need to be shortened.

The most forward hose connection, I think is the fill, looks to be on the front panel. We placed ours on the top panel. This hose may also benefit from being shortened.

The vent line should not need any adjustments, other then install the supplied 90* quick connect.

Like any new custom sac design and implementation, we may also come up with some passive draining. This is usually do to pushing the capacity with a taller sac. So we will work through this as it comes.

[outkastmunkey]

Looking at 825# p/sac

@Rbuss4,

Our goal is to mate with the factory plumbing. SO plug-n-play, but expect a couple minor mods to the hoses.

The current lower hose runs under the sac with a 90* into the sac, we have changed this so the new fitting is on the lower corner of the back panel and will get a straight fitting. I think this hose will need to be shortened.

The most forward hose connection, I think is the fill, looks to be on the front panel. We placed ours on the top panel. This hose may also benefit from being shortened.

The vent line should not need any adjustments, other then install the supplied 90* quick connect.

Like any new custom sac design and implementation, we may also come up with some passive draining. This is usually do to pushing the capacity with a taller sac. So we will work through this as it comes.

Holy *#*< with those bags and some lead to mid ship I bet our R20/RZR would be pushing a nice wave.


Sent from my iPad using Tapatalk

[Firehoser_1]

Wow that is a significant weight increase. Would those fit the 2018 r20? Where would I purchase those?


Sent from my iPhone using Tapatalk

[chpthril]

@firehoser_1

yes, its intended to fit the R20/RZR with the factory 1600# Surf-XL.

You can purchase them from me. Just need your contact info/email and shipping address. PM me.