Surf Board Rack 2007 22ve

[dalesbaby]

Does anyone know a surf board rack that can be purchased for 2007 22ve?

Tower Part #:

XTP Part# TI0022VTA00
Tige’ Part# M3045

[jacques2727]

Which tower do you have? I bought one a couple years ago that fit right into the factory wakeboard fork spot of my "E" series tower. I'll look at the brand name later if you have the "E" tower.

[chpthril]

You can swap out the finger and base plate with a little modification and retain the factory swivel.

[cnote]

i think i had the same tower for 08 z1. i sent my wakeboard forks (only ther forks, i removed them from the swivel) to samson sports in WA so they had a template to make new surf forks. job was really well done, but they couldn't do the brushed finish (finish was polished).

Sent from my SM-G955U using Tapatalk

[killerbren]

https://www.krypt-towers.com/wakesurf-racks/

I bought some of these and the bolt holes for the fingers fit perfect with the factory swivel plate.

[bop217]

I ended up buying that as well and it does work perfect. I drilled a couple holes in my plate and put the stretch cord through it...

Thanks for advice

[Ajramos05]

I had someone sew a pocket on the binimi top for my boards


Sent from my iPhone using Tapatalk

[Hammertime]

https://www.krypt-towers.com/wakesurf-racks/

I bought some of these and the bolt holes for the fingers fit perfect with the factory swivel plate.

This is what I did also. Works fine. It is polished and not brushed. No one but me has noticed so far.

[Hammertime]

I ended up buying that as well and it does work perfect. I drilled a couple holes in my plate and put the stretch cord through it...

Thanks for advice

I currently use an all plastic bungee cord that works great. I was considering drilling holes to re use supplied stretch cord.

Can you share a pic with an without boards?