1st annual Southern Nevada/Utah Cool weather Tige reunion

[race fan]

You guys and gals have a great time. I really wish I could make it. Overton is awesome. Matt is a great guy I had my boat serviced by them a couple of times while I was out in the area and his service was excellent. He also helped a friend of mine buy my 2000 21i from me. I live in Ca and he is in Vegas And he and his staff were alot of help. Thanks Matt.

[anhaney]

race fan

Milerton is in the same boat as Huntington and shaver. Once the valley heat starts to rise you get the inversion layers that start the wind blowing. It is like clock work between 10am and 6pm daily you get rough water. BV right now is 80 degrees according to the post I saw on the waterski report from the news this morning. I really do want to try Lopez as well as San Antonio. they are both pretty close to Naci. and about three hours from Bakersfield pulling the boat over the crazy HWY 46 death row.

[airjorgy]

I grew up in Fresno. We used to boat @ Pine Flat Res. Large Lake,
water level changed allot depending on snow pack runoff. It was
better than Millerton to me, less traffic. I had lots of good
memories there. Any Tige owners call this home?

[chpthril]

Does anyone have any recomendations on where to stay in Overton? We are trying to put things together and come out for this! Sounds like it's going to be great.

[race fan]

there is a Best Western not far from the marina. Also there is another hotel closer but I dont know the name of it.

[anhaney]

Pine Flast is not so good any more from what I heard. There is a lot of rocks and very low water level. No nice shore lines to camp on because the water level is so low. That is only what I have heard. I have heard Bass Lake is nice and have thought about trying that. I have been told you can ski and board at night on that lake if you have tower lights. I guess we need to plan a trip to that location as well. Does anyone have a PCM 6.0 in a 24V. I can not get the engine to move on the mounts to align it properly. I need to move it to the right if you are sitting in the drivers seat. I broke my thumb when I smashed it between the 6' pry bar and the boat when it sliped of the mounts. My guess is I need a Cherry picker to help take some tension of the trunions.

[chpthril]

I'll be there!

Well, we made our arrangements over the weekend. Can't wait to meet everyone and see your boats. Wish I could bring mine.

[talltigeguy]

We'll look forward to seeing you there.

I will have my 24V and your welcome to hop on. Don't forget a dry or wet suit. Mine probably won't fit you.

I will be sure to display my Rival install and Addiction tower speakers.

[Domsz06]

anyone have room for an extra rider for this? My boat is still in OK, and will be there till next season, unless I get to fly home and drive it back sooner. Hopefully I'll have my tige in Cali by the early spring, may bring it back over x-mas, just not sure I wanna haul it over the mountains during the middle of winter.

If anyone is in Bakersfield, and want's money for gas, beverages(adult or children), help cleaning or what ever I'm lookin for a pull or two. I brought my wakeboard and surfboard just hoping I could still get some pulls in before winter. But then again I'll go anytime, I have wet and drysuits, so if your looking for any help, or need a driver so you can go, I'm down.

Thanks!!

Dom

[anhaney]

Matts shop location

I am looking for Matts shop location. I am in Vegas for work right now and am trying to figure out his location. I want to go visit his shop and see the RZ2 if he has one.

thanks in advance

[delongheavyhaul]

main cross streets are warm springs/gibson. go east until 1st right. they are in the warehouses up against the freeway. I was there last weekend and he didn't have a rz2 there yet.

[talltigeguy]

He told me he was getting his first on Thursday.

[talltigeguy]

I just got off of the phone with Matt: His first RZ2 is coming TODAY! Sorry for the misinformation. If you can't find the shop (it is a little of a bear) then call them 702-564-5444.

Boats of Nevada has some other great news. Nick Weinaker (sp?), one of Tige's professional riders is committed to coming to the 1st annual cold water reunion at Lake Mead. I think it will be a great opportunity to see a pro in action. Tony, the tige regional rep will also be there to give support.

Sounds like this is going to be a great time. I would be happy to take everyone on my boat, but space is limited. I also have to take some time to get behind and in the RZ2, unless I can arrange it sooner. I will commit to give chpthril and dom a few pulls - will probably have room for 1 more. I will need someone to drive when I go

[LovinPowell]

Originally posted by talltigeguy
I just got off of the phone with Matt: His first RZ2 is coming TODAY! Sorry for the misinformation. If you can't find the shop (it is a little of a bear) then call them 702-564-5444.

Boats of Nevada has some other great news. Nick Weinaker (sp?), one of Tige's professional riders is committed to coming to the 1st annual cold water reunion at Lake Mead. I think it will be a great opportunity to see a pro in action. Tony, the tige regional rep will also be there to give support.

Sounds like this is going to be a great time. I would be happy to take everyone on my boat, but space is limited. I also have to take some time to get behind and in the RZ2, unless I can arrange it sooner. I will commit to give chpthril and dom a few pulls - will probably have room for 1 more. I will need someone to drive when I go

I might a space on your boat, either that or Matt's RZ2

[evil0ne]

I should be there with my 24V so I should have some space too.