Announcement

Collapse
No announcement yet.

Acme 2773 for 17 Z3

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Acme 2773 for 17 Z3

    Pulling the trigger on a prop today , ik alot use 2419 , acme recomends 2773 or 2775 , anybody run these ? If so quick thoughts
    If you wanna know what I did , come with me next time...

    #2
    The 2419 with its 12" pitch, will be the most aggressive out of the 3, but not by much. Only a 1" difference in pitch to the 2773 @ 13" and the 2775 falls right in the middle with 12.5". If you are boating at a significant elevation, then the 2419 would be the better choice out of those.
    Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More

    Comment


      #3
      Only at 850ft , so good on 2773 , gonna run 250 per side additional lead in the rear . Im good?
      If you wanna know what I did , come with me next time...

      Comment


        #4
        Gear ratio is 1.5 to 1 ? Left rotation ?
        If you wanna know what I did , come with me next time...

        Comment


          #5
          Isnt Tige using a 1.75:1 or something like now on the larger boats? left hand for sure and 1.125" bore.
          Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More

          Comment


            #6
            I have a Tige 2016 r22 it came with: Raptor 360, ZF 41 IV EL drive with a 1.46 ratio, 537 prop
            Last edited by Sevans16; 07-05-2017, 05:12 AM.

            Comment


              #7
              I ran the 2773 on my z and sent it back. If wasn't enough... just FYI.
              Germaine Marine
              "A proud dealer of Tige, Supra, Moomba and ATX performance boats"

              Comment


                #8
                Elevated did you have any prop burn with the 2419 also what was the top speed I have about a 25-minute drive by water to get to where we ride
                If you wanna know what I did , come with me next time...

                Comment


                  #9
                  None
                  Germaine Marine
                  "A proud dealer of Tige, Supra, Moomba and ATX performance boats"

                  Comment


                    #10
                    Originally posted by chpthril View Post
                    Isnt Tige using a 1.75:1 or something like now on the larger boats? left hand for sure and 1.125" bore.
                    1.5 with 1-1/8 on everything but the Rzx line. The Rzx line is now 2-1 with 1-1/4.
                    Germaine Marine
                    "A proud dealer of Tige, Supra, Moomba and ATX performance boats"

                    Comment


                      #11
                      I run 2419 in Colorado with 4k ballast. It's a tractor.

                      Comment

                      Working...
                      X