Props for 2017 Z3

[Langwell]

Acme 1235 or 2247 ? Will run full stock ballast , 250 lead in each rear and bow , so 750 in lead

[Germaine Marine]

acme 2315 or acme 2419

[Germaine Marine]

you wont need 250 in lead in the bow PS. You will need that 250 split over the rear though

[Langwell]

I see they are both 15 × 12 pitch , what is the difference in the 2? would i be loosing that much pull if i went with a 14 pitch? Split lead ? You mean none in bow and 375 in each rear locker?

[Langwell]

Wakemakers website is saying acme 2079

[Germaine Marine]

Dont listen to wakemakers.....

the 2315 is less aggressive and will have more on top then the 2419. The 19 is a stump puller for big big weight. It was fantastic on my 16z3 with around 4500 lbs of ballast, 12 full size adults surfing. No issues no cav.

[Germaine Marine]

Yes, 375+ in each rear locker..

[Lamest]

I'm running the 2315 with 500 lbs of lead under the rear sacks @ 2300 feet and doing well. Most surfing is done at about 3000 rpm so we're going pretty easy on the gas too.
Boat is a 2016 z3 with taps 3.

[hcooperrn]

I'm running the 2419, full ballast with 250 in each rear corner at 5000', it pulls pretty easily. Top end is somewhere just over 30, getting just a little cavitation pulling people up in rough water


Sent from my iPhone using Tapatalk

[Bakes5]

WOT with a 15" x 14 is 37mph

[Sayonara]

I have a 2419 prop (Thanks Bakes5!) on a 2016 Z3, Taps 3, 800lb lead (400 in each rear corner) rear ballast at 100% front at 60%. Adjust Taps3 to your preference and enjoy!
The 2419 has been great !!