Wake Enhancer

[kmo058]

Hi All & Happy Boating,
We have a '99 2100i direct drive and was wondering if anyone has tried any of the wake enhancers such as Mission Delta, Swell Wakesurf or Ronix on a boat similar to this. Everyone seems to have v-drives that has tried these enhancers but no direct drives. Any input would greatly be appreciated.

[bsreid]

My home made gate made a friends Malibu DD go from not surfable to barely surfable.

[kmo058]

Thanks. Before spending that amount of money, I'd like to get everyone's experience first.

[TigeFamily]

If you have enough ballast, on older boats especially...its gonna help whether its direct drive or inboard. No ballast = No wave no matter what you put on there

[Chugh2o]

I had a 97 DD and made a homemade gate and it surfed really well with about 1300 pounds in rear. I am making an adjustable reverse orientation suck gate and I will be selling them for around $160. It works just as good as the others for a lot cheaper. PM me if you want one.

[Ruger761]

I made a suck gate for our boat. Works great I think without listing the boat over. Worked better than my NSS style plate did. While its still not a huge wake compared to the newer v-drives, I can ride rope-less even with my son one the board with me.

[NICKYPOO]

I'm never without my homemade sucgate. I think I'm $40 into it. I've got a new one to test.

[TigeFamily]

Nauticurl + 4500lbs of ballast make a mean wake. I gotta tone it down about 12" with trim plate cause it gets so huge. Much better than I have ever been able to achieve listing the boat...this was tonight

[kmo058]

Thanks everyone for your input. Since Mission Delta gives you a 30 trial period, maybe I'll give it a go since it can't really hurt.

[TigeFamily]

Looks cleaner without me breaking it up with my board, lol

[kmo058]

That's an awesome wake but doubt if I'll get anywhere close to that with my 2100i.

[Chugh2o]

That's an awesome wake but doubt if I'll get anywhere close to that with my 2100i.

Here is a pic of my wave on my 97 2150 and I believe if could be better too. This is also with the shapers I sell.

IMG_0044.jpgIMG_0045.jpgIMG_0045.jpg

[Chugh2o]

This is the shaper but the new ones I am making have hinges for better adjustability. $160

[Chugh2o]

IMG_0046.jpg

[TeamAllen]

What was your weight setup in the 2150?