2016 Z-3 Taps 3 surf settings missing

[Shaver lake z3]

So after having a rear view camera installed on my 2016 Z-3 the surf setting tab is gone from the Tige Touch screen. I can only adjust the Taps tab. I assume a firmware issue. Any suggestions would help?

[TigeFamily]

Probably just needs to be "re-activated" in the dealer settings. I had my firmware flashed....and the bow sac option had disappeared and it activated my underwater lights button which is only light I do not have. I got into dealer settings, de-activated the underwater lights, activated the bow sac and was good to go in 5 mins. You do need dealer code to access. Disclaimer: I may be wrong on this, just an educated guess

[Shaver lake z3]

I got the dealer code but when I get into the settings there is no option for the Taps 3.

[freeheel4life]

Who put in your camera and enabled??

[Shaver lake z3]

My dealer. There an hour away so was hoping for an easy fix before I pull it off the lake and take it in.

[TigeFamily]

Had to be something they did while messing with the settings

[Shaver lake z3]

Ok think I found the issue. In setting it gives me the option to enable ActiveVX but I have Taps 3. Looks like wrong software got loaded when the camera was added. Can this be fixed by reloading via thumb drive?

[JCP]

Try choosing AVX, reboot and then see if it gives you an option to switch back to TAPS3.