Taps 3

[mytige]

Has anybody taken off the avx on a Z3 and installed taps 3? I was wondering how it worked, and what the cost would be

[Germaine Marine]

Has anybody taken off the avx on a Z3 and installed taps 3? I was wondering how it worked, and what the cost would be

A handful have done it. If you do a quick search you should find those pages,

[Germaine Marine]

As for cost, you are going to spend roughly 3-4k4

[JCP]

Tige will no longer sell you the parts for a conversion. I have tried.

[bsreid]

I'm trying to figure something out right now, so I'll let you guys know how it goes.

[UNSTUCK]

It's simple and costs about $1200 to do it through the aftermarket if you are ok with it being totally manually controlled through switches. Add another $1000 or so and you can gps automation.

[bsreid]

UNSTUCK, the files you have for yours, are they exactly the same as the tige ones? Also are the tabs on the R20 the same as an RZX?

[UNSTUCK]

I don't think they are exact. I took my measurements off an rzx. When I did it I didn't think to bring something to measure angles. So I guessed on them. I would say that most sharp Tiges guys would think they are factory. Super sharp Tiges guys might guess that they they aren't.
When I was at the dealer getting my measurements off the rzx they only had a z3 there with taps three as well. Those tabs were the same as the rzx. I'm pretty sure they were the same across all the boats.

[bsreid]

Thanks. If the dealer won't work with me on getting some, maybe I can get them to help me out on the size differences between the models

[Germaine Marine]

Tige has never been willing to do it. Most dealers can. If you are in AZ or Utah it wont be a problem. It's a service Germaine can do without issue.

[bsreid]

Do you think they would ship the parts up north?

[Germaine Marine]

Sure , the issue is flashing the software for taps 3 vs avx adjustment.

[Germaine Marine]

I don't think they are exact. I took my measurements off an rzx. When I did it I didn't think to bring something to measure angles. So I guessed on them. I would say that most sharp Tiges guys would think they are factory. Super sharp Tiges guys might guess that they they aren't.
When I was at the dealer getting my measurements off the rzx they only had a z3 there with taps three as well. Those tabs were the same as the rzx. I'm pretty sure they were the same across all the boats.

Plates are the same across the line.

[boardman74]

He's got an R20 software won't be an issue. He will need switches. No Tige Touch.

[Germaine Marine]

He's got an R20 software won't be an issue. He will need switches. No Tige Touch.

Doesent he have a z3 with AVX?