I've tried to search and all I can find is info on wiring a GoPro to Tige Touch 1 and was wondering if anyone had any info on what would be required to wire one into the Tige Touch 2 screen of my 2016 Z3? Thanks in advance!
-
-
Several forums on this but here is the way I did mine awhile back. Look at post #39 on forum link. Search "gopro" and you will find several other forums if mine isn't the way you want it. Know many others have done similar installs and posted on here. Good luck!
http://www.tigeowners.com/forum/show...ighlight=gopro -
Is yours the Tige Touch 2? I know some 15's had either TT1 or TT2.. and thanks for the response.
Sent from my iPhone using TapatalkComment
-
-
Right on, I'll get some cables ordered up! Thanks for the help!
Sent from my iPhone using TapatalkComment
-
Touch 1 - simple plug your rca output into the video 1 position (yellow female RCA input) on the viper (The blue box under the dash). Select "video" on the touch screen.
Touch 2 - Follow from the grey plug at the back of the touch screen to the video 1 (or video 2) plug. There is a pair of heat shrinked cables (both have a red and a grey wire directly out of the grey main plug). That is your input to the touch 2 "video" button.Oh Yeah!Comment
-
Is it as simple as that, wow. I have an 2011 RZR, assuming this is Tige touch 1, and a go pro session, will this work?Originally posted by KoolAid View Post
Sent from my iPhone using TapatalkComment
-
All of the Touch 1's have an input on the viper for video. Im not sure about things on the Go pro side. As along as the go pro has some sort of adapter that gives the single RCA video output, all you need to do is to plug that cable into the vipers video input.Oh Yeah!Comment
-
So on the touch 2 the video in is just male rca? Went to plug it in and that’s all I could find.Comment
Comment