Almost time for the new install!

[KyleRass41]

Got the goods! I'm going to try and post as I go.

Final installed items will include;

2 Syn-dx6's
Syn-dx4
6 ws650s
2 ws808s
2 rev8s
2 rev10s
1 xs12
420sq with added auxiliary port and under dash mount
Custom built ported box
0 gauge wiring and a custom panel for amps.

Leds for tower speakers as I go.
2nd seablaze 3 underwater light
Adding 3rd battery and my 3 Bank charger
Led bulbs in tower

Boat is a 2013 z3

Can't wait!!

[KyleRass41]

Would there be a need ever for either a syn2 or exile xm15.4? If not no biggie. Obviously will love having matching amps and keep it all clean. Just curious though.

[Bakes5]

Where are you putting the 3rd battery?

[KyleRass41]

Should be room in the rear starboard side.

[KyleRass41]

Since I'm going to use 1 big block for 2 amps, why would I need the 2nd big block and not just use the ANL fuse? Seems like a waste unless you had a 4 amp set up. Or maybe I should have found a 0ga to 3 4ga outs to simplify. Because now I'm still running an extra wire to power 3rd amp. Unless I'm missing something

[chpthril]

What 2 big blocks do you have?

[KyleRass41]

It's the ww-big block with 2 in and 4 out.

[chpthril]

Given the distance between the battery/switch and amps, I would avoid running a dedicated power cable run just for that 3rd amp. Also, you are going to want to un-bridge the outputs and use an appropriate MANL fuse for each amp and NOT a single ANL that feeds two branch line outputs. So you are looking at a dedicated B+ block and a dedicated B- block or your choosing.

[KyleRass41]

I lost you.....so I don't want to use the big blocks from wet sounds that I bought? They sent 2 ANL fuses as well.

[KyleRass41]

And I have 25ft of 0ga both red and black

[chpthril]

What part. Those blocks can either be wired as a combo B+ and B- and feed 2 amps, or as a dedicated block thats 1 in and up to 4 out for either B+ or B-. Since you have 3 amps, you would have to use both blocks in the 1 in 4 out (use only 3) or use one block as a combo and then wire the 3rd amp direct to the battery/switch. This, I dont suggest.

Unless im missing something, one ANL fuse would be feeding 2 amp branch lines. Om not fond of this. I suggest the smaller MANL fuses each of the right amperage for each fuse.

[KyleRass41]

I get it now. Sorry! Thanks for the info!