After getting our boat out it seems we are missing the bottom two bolts and nuts from the swimdeck brackets. We have a 13 RZ2 with VX, any recommendation on getting a temp replacement or from dealer only.
-
-
Post a pic -
Go to hardware store and buy some stainless bolts, washers and lock nuts.Comment
-
The stainless steel bolts at the hardware store are a thought. But would didn't want to damage the bracket.
Sent from my SAMSUNG-SM-G900A using TapatalkComment
-
It's not a standard bolt that goes there. It's should be the same as the upper. I have one on my shop floor. I'll go take a look in the morning.Comment
-
I have had 3-4 come out or at least come loose on my 15 Z3. Luckily the ones that came out were laying in the bottom of the platform somehow. I Thread lock them and put back in place, and I make sure to check the bolts every time I put the plug in boat to launch.
Remove other side and take to hardware store and replace with a stainless as stated above. Thread lock in place!!Comment
Comment