ignition switch 2004 Tige 22V Riders

[dlcork]

Looking for some help in purchasing an ignition switch for my 2004 22V. The two Tige dealers closest to me seem to be unsure as to which switch it is I need. I think I have attached 2 pictures of my switch from the behind, if anyone can offer some direction as to where I can get a replacement it would be much appreciated.

Thanks,

Dan

[Captainkurk72]

Looks to be 2-position switch. Just stop by a marina and they will have one. I got lucky and found the exact replacement from one our local marinas.


Sent from my iPhone using Tapatalk

[dlcork]

Thanks, I am going to remove it this weekend and take it in to my local marina. The 2 Tige dealers I have spoke with are showing me a 4 connector switch saying that is what Tige tells them was used in my boat.

[Captainkurk72]

My 05 22V uses a 4-position switch. Are you sure the picture is your ignition switch? It looks like the back of a 12V outlet which on my boat is below the ignition switch.


Sent from my iPhone using Tapatalk

[Stingreye]

My 05 22V uses a 4-position switch. Are you sure the picture is your ignition switch? It looks like the back of a 12V outlet which on my boat is below the ignition switch.


Sent from my iPhone using Tapatalk

My 2004 24V has the 12V outlet below also. The wires to the right appear to be the horn. I think its the wires further up our of the picture. That assumes my 2004 24V is the same as your 2004 22V. Pic below showing the placement of my key horn and 12V outlet.

DSC01745.JPG

[chpthril]

Pretty much only 2 choices, ACC or no ACC. Do you want or need ACC? Typically the stereo is the only thing wired to the ACC and most peeps take the stereo off and relocate to a rocker. Id go with the non-ACC

[dlcork]

Thanks all.....now you have me wondering if I did indeed take a picture of the wrong switch. Will remove this weekend and see what I have to work with. Thanks Mike for the advise on the non-ACC.

[lee]

I would not remove it until I had a new switch. It is easier to transfer the wire to the correct post one by one and get them correct.

[NICKYPOO]

4pos model- Sierra MP41040

I just put one in an '01 21v. I also have one in my '00 22i. I didn't need the acc post for the 21v but no big deal. It still works just fine. They make a 3pos one as well.