Whats everyone running their taps 3 at?

[Timmy]

I know taps 3 is new but wondering what everyone's setup is? We have a new RZ2 with the surf XL ballast and have been trying to figure out the best setup. Right now the biggest wave that we have been able to produce is full ballast with right side taps 3 at 11 and Taps at 4. Any suggestions from the taps 3 owners?? I'll try to post pictures later today as we are heading out soon. Thanks,

Tim

[n3vrsat1sfied]

Whats everyone running their taps 3 at?

Here is what our dealer recommended on our z1


We went out today and found this setup worked well for port side I surfed with taps at 4 and surf plate at 6 or 7 at 10.8mph.

Goofy side we found taps being up at 7 was way to nose high and the wave was all wash. Dropped it down to 5 and surf plate at 5. Also bumped up the speed to 11.0. Goofy side certainly seems harder to setup.

Sent from my iPhone using Tapatalk

[ryfrutiger]

I have had luck with filling the bow at 40-50% and 100% in the rear. I start TAPS3 at 4 and Taps at 4 and go from there. This is the setup I have and I ride regular, I have noticed that you need a little bit more weight if you are primarily riding goofy. Hopefully this has helped, post some pics of the surf wave as well as your setup once you dial in the boat!!!!!

[Z3CO23]

I have had luck with filling the bow at 40-50% and 100% in the rear. I start TAPS3 at 4 and Taps at 4 and go from there. This is the setup I have and I ride regular, I have noticed that you need a little bit more weight if you are primarily riding goofy. Hopefully this has helped, post some pics of the surf wave as well as your setup once you dial in the boat!!!!!

40-50% of what ballast configuration up front. Surf XL package front ballast?

[ryfrutiger]

Yes Surf XL and that is what I am running in the bow.