RZR prop choice

[g-mantrix]

Hi all, I did a search but couldn't find answer, but I am changing the prop on my '11 RZR with pcm from the current 13.5 X 14.25 acme 1631.
Mostly boarding but also surf, have surf sacs fitted
What's peeps using for best result out of hole?
TIA


Sent from my iPhone using Tapatalk

[chpthril]

The 1619 is .5" less pitch, so that will improve the hole shot. The 1617 has the same pitch as the 1619 but has .5" more dia. This will help with speed holding and cavitation and counter the increase in RPM that you get with a drop in pitch alone.

[g-mantrix]

Cheers chpthril I was also considering the 1235 14.5 X 14.25 although 1" bigger dia than my current prop but smaller cup size


Sent from my iPhone using Tapatalk

[chpthril]

The 1235 is a stump puller for sure. As long as you have the 343HP or larger, you should be good. But, hull clearance would be something I would want to check on the RZR.

[g-mantrix]

Yes I have the 343pcm
The 1235 is suggested by Tige dealer service tech but good point will check


Sent from my iPhone using Tapatalk

[99bison]

I have both 1235 and 1617. With an absolute ton of weight we like the 1235 and lower rpm. Otherwise 1617 is good by all means.