WWS Tige Z3 Build!

[JLG]

Great to see dealers doing one off stuff!! Can't wait to see the 808s and 3-XXX installed! Sounds insane but I like it

Might just be me but I'm not a fan of the 410s though. Just to bulky for the Alpha tower but maybe not as bad in person. Pics make them look large with less head room. Either way great work!

[NickWWS]

12226504_10154076969126754_1554523656_n.jpg12226344_10154077309151754_693090377_n.jpg12226824_10154079632146754_1236964699_n.jpg12231226_10154079632291754_231837414_n.jpg12226591_10154086223866754_103562470_n.jpg12231532_10154086223991754_955110349_n.jpg12233407_10154086224176754_527557269_n.jpg12242161_10154086224541754_29660597_n.jpg12212338_10154074734866754_1085468164_n.jpg
Lots of cutting went on late last week and today! 808s install and removal of the cooler to put the sub boxes in!!

[NickWWS]

12202297_10154075113516754_868425757_n.jpg12204780_10154075113456754_873942620_n.jpg

[Surf406]

I think I would have put the 3rd sub behind the driver seat in stead of in the walk through, I did it on a blk z3 and it worked great it will be interesting to see how you trim that center one out. either way I know my boat is wicked loud with 2 xxx12s 3 will be great for sure

[NickWWS]

I think I would have put the 3rd sub behind the driver seat in stead of in the walk through, I did it on a blk z3 and it worked great it will be interesting to see how you trim that center one out. either way I know my boat is wicked loud with 2 xxx12s 3 will be great for sure

We thought about that for sure. We did it this way so we could keep all the subs on the same plane. This allows the sound waves to travel at the same frequency and has a better sound. Not just loud, but clear and crisp bass!

[JLG]

No 808s in the bow? That is the one are on my Z3 I wish had more sound when beached

[NickWWS]

No 808s in the bow? That is the one are on my Z3 I wish had more sound when beached

I would have to completely re do the molded in speaker mounts in the bow to fit the 808s. and with the bow cushions it would be a ton of work... I am putting 175 watts to each 650 in the bow; they peak at 200 so it should still sound pretty good up there.

[JLG]

Nick totally agree with that as that's why I didn't do anymore in my front bow. I am powering the chit out of my 6.5" also in bow. Wish tige would consider on the z3 like the rzx and perhaps more models that are at the 100k mark to have the 808s in the interior as a standard. Seems like the Gs and a few other boats that have the 8s in the front have way more sound coming from front when beached or facing the front. Plenty of sound to the rear just not enough up front when out of the boat IMO.

Great work BTW keep the pics coming

[chpthril]

Up until this year, the G's had a price point polk 6.5 with 50W rms to them. MC (JL 7.7) and the Bu MXZ ( Rockford M282) are about the only models other then the Tige ASR ans RZX running anything larger then a 6.5, but with no real wattage behind them at that. The G now runs the JL 7.7 for 2016. A 7.7 is a little larger then a 6.5 and the 808 is a little larger then the 7.7.

No 808s in the bow? That is the one are on my Z3 I wish had more sound when beached

Convert a pair fo the X mount tower pods to TC3-S and rotate them when beached. Far better then trying to get volume from a speakers thats angled toward the aft of the boat, opposite the beach.

[Batty]

where abouts did you mount the amps?

[gwhite94]

@Batty all six amps for this install are mounted under the glove box, 3 in the factory location and 3 mounted on the sub boxes. This is a very clean install and sounds killer, I will take some pics this weekend and post up.

[NickWWS]

Tige WWS Rev 410.jpgTige WWS Z3 808.jpgTige WWS Z3 interior.jpgTige Z3 Sub Grill.jpgTige Z3 Sub.jpgTige Z3 WWS.jpgWWS tige Z3 Subs.jpg

We have light and sound!!! We are still tuning the set up and getting everything dialed in but it still sounds out of this world!!

[JLG]

Badazz install. Great work WWS

How much taller is that cooler cushion? Do you guys have an in house stereo guy or hiring it out?

[Batty]

Thanks @gwhite94…..im doing our install at the moment in a Z1, I'm only running 4 amps and 2 xxx but just having trouble working out where to put the amps and make it look good.

[chpthril]

Thanks @gwhite94…..im doing our install at the moment in a Z1, I'm only running 4 amps and 2 xxx but just having trouble working out where to put the amps and make it look good.

I would consider using the factory glassed in composite board to secure a larger board to, that will hold the 4 amps. You could use 1" standoffs to create a raceway behind the new wall for hiding the cables and have them come up underneath the amps.